240 from the terminal block till you find where it stops HI thanks for your question. check the timer contacts B & C on the timer. could be your probem thanks the appliance doc. please rate my answer.
...power supply .you need 240 volts check that . belt could be broken . check that . the appliance ...
my dry is not heating but drum turing hi .thanks for the question . check the voltage at the outlet ,you need 240 volts. if power is ok .check the element . thanks the appliance doc
...at radio shack. real cheap. check those parts. have a problem. get back to me. thanks the appliance ...
...up the top and check the switch also make sure you have 240 volts at dryer thanks the appliance ...
...240 volts at dryer outlet. check element, clean all lint . remove vent, and clean. check thermostat. thanks the appliance doc It's time to change your dryer cause your element must have burned. It's ...
...fuses to run the dryer i would check your breakers or fuses it needs 240 volts thanks the appliance ...
Question about Whirlpool Dryers
...pull dryer from wall . remove the back panel. the element is on te right . check the element. also the voltage to the dryer. it should be 240 volts. thanks the appliance doc. please rate my
...at the top left of the heater housing make sure you have 240 volts at dryer thanks the appliance ...
...check that next is the belt broken check that the problem is in those three thanks the appliance ...
65 questions posted
Usually answered in minutes!
1,329 Questions
1,410 Questions
750 Questions
524 Questions
182 Questions
