White Sewing 2037 Mechanical Sewing Machine "snarled" Questions

My Pfaff Classic Style Quilt 2027 is getting large thread snarls on the underside of the fabric. large thread snarls underneath fabric and under throat plate. Top tension problems.  Tighten the ...

question about a bobbin why does the thread knot up under the plate First you have to determine if the thread under the plate is the bobbin's thread... or just great loops from the upper ...

singer sewing machine pulls fabric and snarls My singer machine grabs the material and pulls it down while I sew, especially when I stop the needle and try to lift it and take the fabric out. it also ...

...thread no longer will feed up and catch with the upper thread. I was sewing and the thread became snarled; I stopped and cleared the snarling and attempted to re-thread the machine. The thread

All of the fabric is jammed i undo needle clamp, with needle now free you can turn wheel and gradually loosen and remove needle, take off needle plate to access the snarl up then pick it out little ...

Why does my bobbin thread end up a snarl on the underside of my cloth and my machine stop running. Model 148.15600 made in early 1970's Try changing your stitch length, if its too shortl it will bunch

I have a Janome 419S machine. it snarls as soon as I put the needle into the bobbin--breaks the top thread it does not matter what fabric I am sewing with. increase top thread tension so that it pulls

thread snarls underneath material turn your bobbin over. check your manual for to be sure it is loaded correctly, (and bobbin tension is set correctly). Make sure the machine is threaded right. And if

Thread nesting on the bottom Rethread the top of the machine with the presser foot up; sew with the presser foot down. If the fabric is too thick/too many plies, the presser foot is forced upwards, ...

Kenmore 148 bobbin thread ends up a snarl under the cloth. Seems like thread is not coming off bobbin smoothly or measured, ending up with tangle and stopping. Usually it is your top threading or your