Thumping sound at the end of spin cycle. I am try to help a friend out. His washer at the end of the spin cycle makes an unually loud thumping sound. I assume it is the brake. You can hand turn the ...
Thumping sound without spin In the spin cycle, the washer makes a thumping sound (not actually thumping, though) and does not get to full spin speed. It does spin, just not fast. What could the ...
Question about Maytag Washing Machines
washer fills with water, loud thump sound, no agitation occurs. Thump sound is followed by burning smell? The thump is probably the motor trying to start followed by the burning smell of the belt ...
Question about Speed Washing Machines
What could be the cause of loud thumping during spin? The instant the spin cycle starts there is a loud consistent thump,thump,thump during the spin. It starts immediately even before the tub gets up ...
...thumping sound wash cycle is fine, but it just started making a loud, steady thumping sound while draining and spinning, the water drains without any problem, and no sounds while agitating. Could be ...
sound for about 8-10 secs. It is like it is trying to stop but is having a hard time. Hi, Welcome to FixYa. Based on your description this is what it sounds like. 1) The basket drive block has worn or
Question about Washing Machines
...machine make a loud thumping sound,model number 41744042400 just replaced shook absorbers and still thumping. think i have to take the drum appart? Are the springs intact that hold the drum
I have a sears roebuck hd model 92279100 it will do everything but spin. We used to be able to lift up on the agitator and it would spin, but it won't do it now. sounds like you have a bad drive block
Question about Samsung Washing Machines
...thumping sound. When I spin it by hand in anticlockwise then it works fine. I think some setting or wiring condition or some failed part has caused it to spin in clockwise. Any suggestions will be ...
...thumping sound like it is out of balance or bad bearing.... If its thumping you have the maching overloaded and the clothes (very easy to do with heavy jeans or sweaters) are all on one side causing ...
1,215 questions posted
Usually answered in minutes!
992 Questions
371 Questions
398 Questions
323 Questions
255 Questions