...it is the key panel or control panel that is causing an F7 beeping error? The ribbon is in a connector that has to be pulled up to unlock. Look for a part that can slide up away from the board. ...
...f7 code On most GE ovens you open the door and across the bottom of the control panel there are 3 1/4 inch screws, one in the center and 2 on either end going straight up into the console. remove the ...
...slide in range with the F7 code. Will the business card work between ribbon cable and kep pad? No, this is not an appropriate way to solve this issue. You will need to replace the ERC, in this case. ...
...slide in. I tried to separate the ribbon but was only getting laminate facing. I remembered another site where the guy suggested trimming the end of the ribbon cable by a 1/4" - It Worked ! ! ! At ...
...F7 error displayed, I cannot use the owen at all. Any tips on how to fix it would be greatly appreciated. Thanks. I inserted the paper and cleaned the connectors with an eraser. However, i felt that ...
...F7 error and the fix may be similar. It indicates that the touchpanel needs to be replaced. The problem is really one where the insulation is breaking down between two sections of the ribbon cable ...
34 questions posted
Usually answered in minutes!
293 Questions
216 Questions
128 Questions
114 Questions
86 Questions