Hunter 20531 Vista Brushed Nickel Ceiling Fan "fans lights dim" Questions

...lights won't dim (just blinks when try to dim)! Hunter "kinda" admits there is serious problem with remote but doesn't have a solution. Tells people to try changing to different code due to possible ...

...lights in my Casablanca metropolitan fans with intellitouch controls fans I have recently switched over from incandescent lights to LEDS and found some LEDs that work well in my fan-- I talked with ...

Light on ceiling fan is very dim. Do not have dimmer switch. Changed bulb but light is still dim. Could something be wrong with the fan? If it has a remote, press down on the light button and keep it ...

how to use remote on ceiling fan id m8crl 103 seems like there should be a way to dim the lights Press the light button and bottom green button at the same time the lights dimming feature will work!

...I'd ask the expert. Ideas? Mark Sounds like a wireing problem, You wired the light dimmer into the fan control. thats why the fan slows down when you dim the lights. good ...

I have a remote controlled ceiling fan and light. The fan works but the lights suddenly stopped working. They dimmed and brightened and dimmed and brightened and I attempted to turn them off and on ...

lights on my hampton bay ceiling fan are dim. the model is ac552al. one fan light is dim one is not you will have to open up the ceiling fan to check all the wires, i would suggest getting an ...

...fans speeds, turns fan on and off, but the light kit is stuck on dim and the remote button for that will not change anything. Any ideas?? Thanks Have you tried holding the dimmer switch for 16 to 20 ...

kendal fan/light remote UC7208T doesn't dim The remote has 3 fan speeds, and that works. But the dimmer control either sets the light on or off, there is no middle ground. If you have CFL bulbs they ...

fans with remotes will dim the lights by holding the light button for a few seconds. So, the red wire would stop this feature if wired directly to the fixture. That would eliminate the wire coming out