...Circuit Board, try hitting it with the handle of a screwdriver in various zones. If you notice the problem comes and goes while doing this, then your'e close to the zone where resoldering is
...15 DXF guitar amp. The input jack has been twisted off and broken out of the circuit board. I would like a diagram of this part of the circuit. OR Is this soldered to the circuit board in 2 or 4 ...
constant load noise when i switch my amp on As soon as i put my MG Marshall CD 15watt amp on it booms out a load noise which is constant like a dog howling, what causes this and how can i solve the ...
...Watts RMS and the input voltage is a nominal 12 volts for example- the current being carried to the amplifier- not counting the amplifier current requirement to do what it does would be over 166 ...
...circuit indicating they are blown. Your amplifier should be rated at NO MORE than 150 Watts RMS continuous for safety of the horn. Speaker ratings are based on advertising... so don't believe the ...
...handle in tact and pull out the chasis. look at your fuse to see if it is in its holder correctly, and see if the fuse is burnt. the correct fuse values will be printed on the circuit board. if the ...
44 questions posted
Usually answered in minutes!
1 Questions
9 Questions