Polaris 380 In Ground Pool Cleaner "remove" Questions

how to seperate pump from motor Disconnect all power. Remove the six bolts holding the seal plate to the wet end. Remove the two small allen screws to remove the diffuser. Remove the dust cap from the

How do you remove the top cover housing on the Letro Legend pool cleaner? The housing is gray. Remove the bag, remove the head float, remove the screw that adjust the water pressure to the tail hose, ...

how to remove impeller seal Remove v-clamp from wet end. Remove diffuser from wet-end using a flat blade screwdriver. Remove impeller screw by turning clock-wise(this is a reverse threaded screw (some

removed four bolts,can not get motor off depending on the pump you have, you'll need to remove the seal plate from the wet end and remove the impeller before you can remove the motor.

remove impeller Based on the limited info. For most jacuzzi pumps, you will need to remove the lock ring and pull the pump apart to expose the impeller/diffuser. Next, remove the diffuser to expose ...

need instructions on replacing filter head on a haywad de filter ec75a Remove the nuts and bolts around the head of the filter. The top then seperates from the bottom. if the top of the tank is broke ...

...Bearing at end with power cord turns freely. Bearing against the pump hardly turns. How do you remove the pump and get to the bearing to replace? Should the pump be replaces as well? Vern, to ...

removing pool pump impellor Removing pool pump impellor from motor shaft Separate pump and motor. Remove diffuser. Remove back cover from motor. Motor shaft has either a slot for a screwdriver or a ...

how do I remove the pb460 booster pump in order to install the new one? Does the water have to be turned off from the pool? You are trying to remove the pump so you can replace the impeller correct? ...

how to remove pump from motor remove the bolts holding the suction side cover on. remove the cover on the end of the motor and use a tool (armature holding tool) to immobilize the motor shaft. remove ...