Bowflex Treadclimber "fuse" Questions

I have an Avanti gfit motorised t/mill.It has blown a fuse that is located on the circuit board.the fuse is rated 250volt/10amp.Where can I buy some more fuses, and how do I get a service technician ...

Fuse keeps blowing immediately when switching on the treadmill, why does this keep happening? Whilst running on the treadmill belt, approximately 15 minutes in the belts stopped running, there was a ...

reebok edge 2.2 treadmill stopped suddenly then blew fuse 1) Inspection if the fuse is the correct Amper and Voltage: example: you can not connect any FUSE less if they use 10Amp, not use 5 amp, or ...

I'm not sure of which fuse u would need the fuse was taken out so there is no fuse in the treadmill You need to replace the fuse with a 10A rated fuse. It will look like the image below, and you can ...

We need a ceramic fuse for the control board for a Bladez BF 6525 treadmill. We do not know the amps and have been unable to find one that does not blow when we start the motor Our issue started with ...

bowflex TC5500 fuse for motor board. When staring the machine for work out, the motor kicks off then reboots. How do we order and replace a fuse? You can order the part:www.fitnessrepairparts.comor ...

i have star trac elite it have fuse bits failed problem I also change the fuse it still have fuse bits failed problem Then you have a short. Will need to track down the source of the short and fix it ...

fuse What size of fuse does it take normally is 15 amp, for 220vac. However you must see the if you Fuse is 20amps. Read in the metalic size the inscription,you will see the amper Fuse and replace. ...

The fuse for my Sportsart 3108 incline motor keeps blowing. I have replaced the fuse 3 times but as soon as I change the incline the fuse glows orange and burns out. Any idea what could be the cause ?