Kenmore 60721 Refrigerator "happens cant water fridge" Questions

water outlet drain in the back of our fridge keeps blocking with a snot like slime, what is this? why is it happening and how to i fix it? If you look inside the fridge, you will see a drip catch unit

...water. Any ideas this happened to me two just before i moved from alicesprings to wagga wagga its jut the sel in the upper dooor u cant see it but my dad works with people who fix these types of ...

...water dispenser has frozen and my produce is constantly frozen and ruined. I tried changing the temp all the way up to 48F no change, I even tried going down just for the heck of it and nothing. I ...

Water in front of fridge I have had this happen before I had a repair guy come out and replace some part that pertained to the defrost systom. Cant find the old bill. Looking to find out what the part

...cant get rid of the fridge is clean & only 2 years old the drip pan i dont know how to remove how do i solve this Sorry I don't know this model, so I can only give generic advice on this one. Most ...

happens is the drain hole gets blocked from ice freezing over the hole at the back of freezer, the drain water has to go somewhere, since it cant leak out of the drain hole where it suppose to it ends

...water at the bottom means a clogged drain tube. which would cause the fridge not to get cold. its blocking the air vets , so the cold air, cant get down to the fridge section. . remove back wall ,of ...

happens again within a week than your bi-metal ( defrest thermostat) is bad. To replace you have to remove the back panel in freezer and and on the condenser coils near top you will see a little round

...water in it gets frozen, but it will not make ice. My boyfriend is in the process of fixing my fridge. There was ALOT of ice on the back of the inside of freezer and it made it to where the fan ...

happens is the water in that drain tube freezes. so the water in the defrost cycle ,cant go down to the drain pan. to repair fridge must be turned off. for at least 24 hrs. insert a small plastic tube