...gets hot and weak. Motor housing gets too hot to keep your hand on it. Service tech told me the motors usually don't go out. What other problem could it be? I'd say you're most likely overloading the ...
Question about Food Mixers
How do I get a parts list for the sm248 mine the beater assembly is slow and smells hot. can you help I was using the mixer when it got very loud using the beater and started to smell hot. well it ...
The beater shaft seems jammed. I can't push it up to remove my beater. best returned to service centre as these are very hard to get apart. Filled a sauce pan with hot water and placed on bowl stand. ...
Question about Hobart Food Mixers
...of the motor with a contact switch around the shaft Contact Hobart for a schematic and manual if you lack one. While on line, ask a technician why it gets hot as this is a sign of a bigger
After heavy use, there was a hot smell coming from the mixer. After a shut down of 5 minutes, the mixer would not start, Removal of the cover shows no hot spots or burned wires. Is there a test ...
beater is stuck Can't get beater out after making cookies. I had this happen on my Kitchen Aid mixer. There is probably a build up of dough/cake mix etc inside the hole where the beater fits into. ...
Question about Kenwood Food Mixers
How can I service an A901 kenwood mixer, need to get top plate off. Has been smelling and getting hot, need to check belt and maybe lubricate the speed control on my kenwood chef A901 is not ...
...gets an electrical smell ( like something is getting hot) when I use it. your brushes are worn out and are arcing on the commutator, you need to replace them soon,as this is your electrical smell if ...
Question about KitchenAid Food Mixers
cant seem to get the mixer attachment off its well and truley stuck tried all the suggestions in the instruction manuel but it just wont budge help!!! not had it that long and only used it a couple of
Stuck blade I can't get the blade off. I've been steaming the spring but still nothing. Any other suggestions? the spring is stuck in the release pin. usually wrapping it in a hot steamy towel for a ...
457 questions posted
Usually answered in minutes!
493 Questions
285 Questions
205 Questions
183 Questions
89 Questions