Sharp R-1500 Microwave Oven "change light bulb range hood" Questions

...range. The hood lights underneath do not work. I've tried changing the bulbs and I've taken off the underneath cover to look at the wiring. Everything looks fine (though I'm not an electrician). ...

...change the light bulbs underneath your Microwave: 1)To replace light bulbs, first disconnect power to your microwave oven at the circuit breaker panel or by unplugging it. 2)To open Light Cover, ...

...light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such ...

...light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a ...

...light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a ...

...range bulbs will not stop burning out. They rarely last more than a month or two. I always stay within the recommended wattage (no more than 30) and I even tried lower 20W bulbs, with no change. Why ...

light bulb in, I noticed that the light doesn't work. The microwave works fine except for the hood lights. Can you repair the smartboard and for how much? Thanks, Bill Andrews We see (and repair) this

...change the light bulb in the microwave If there's no obvious removable cover over the bulb (and the owner's manual doesn't address it) some disassembly may be required. I have a diagram at my site ...

...light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a ...

...light bulb under the hood, without thinking to unplug unit first. Big mistake, it must have shorted the fuse because there was a pop and then micro went dead. Any help is much appreciated. ...