20 Most Recent Sharp R-930AK Convection/Microwave Oven Questions & Answers


Sharp Convection Microwave won't heat and turntable won't turn.

I typically find it is not door hinge issues but door switch issues, especially with sharp. You may heve a little movenent in the door hinge and that is allowing the door hook to move up and down on the plunger for a door switch that is probably a bit melted due to bad connections. If you check the door switches and look for any browning around the terminals where the wires push onto the switch you will probably find an overheated connectoion. Replace the bad switch and run better wires and better termninals to the new switch and it will probably be fine.
10/3/2021 1:39:39 AM • Sharp R-930AK... • Answered on Oct 03, 2021

Sharp R-930 not heating up to temperature

It may be the thermistor, heating element, etc.

We have the full service manual for this model and have uploaded it to our site here to help you.

You will need the
free Acrobat Reader to view or print it in case you don't have it.

The manual has complete disassembly, test and part replacement info, as well as a very good troubleshooting chart.

The best place to order Sharp parts is Tritronics. You can also call them at 866-779-5835.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.
2/27/2021 8:51:49 PM • Sharp R-930AK... • Answered on Feb 27, 2021

When I run the my

Don't waste your money on unnecessary sources and unwanted repairs. Get this manual online under $10-15 and get complete guide on whether to repair or not, service it, and how to repair etc Best Manuals
3/5/2018 6:15:14 PM • Sharp R-930AK... • Answered on Mar 05, 2018

I have a Sharp R-1870 Convection Microwave in my 2004 Holiday Rambler. I need to remove it to change out the motor and switch in the damper assy. How do I remove the microwave so I can do this? I&#

It's usually just the switch, and also be sure the damper door is not bent or blocked. We have the applicable service manuals for these models and have uploaded them to our site here and here to help you. If you have other questions, please feel free to contact me directly (see below). .- William E. Miller, AS-EET [email protected] http://www.MicrowaveControl.com Microwave Oven Control Panel Repair Nationwide "Recycling by repairing since 1982"
12/1/2017 8:51:33 PM • Sharp R-930AK... • Answered on Dec 01, 2017

Convection oven does not get warmer than 200 degrees even when set on BROIL

The service manual is here: http://www.microwavecontrol.com/dcm24_r930ak_aw_sm.pdf You may have a failed thermistor. Contact me directly if you need more help. - William E. Miller, AS-EET [email protected] http://www.microwavecontrol.com Microwave Oven Control Panel Repair Nationwide "Recycling by repairing since 1982"
5/7/2017 12:34:17 AM • Sharp R-930AK... • Answered on May 07, 2017

Microwave fuses

Just replace the fuse Brother. No harm done. BUT, keep it away from your wife. Maybe she's thinking doubling the voltage would make it twice as fast. NOPE!!!
5/2/2017 9:53:56 PM • Sharp R-930AK... • Answered on May 02, 2017

Doesn't heat up, with turntable turning and lights on

high voltage is blow due to over heatered..replace high high voltage fuse..
7/16/2016 3:43:44 AM • Sharp R-930AK... • Answered on Jul 16, 2016

Sharp carousel microwave R930AK

check the door lever
5/15/2016 4:06:37 AM • Sharp R-930AK... • Answered on May 15, 2016

Will not turn on . Appears as though there's no power.

I'd try to unplug for a while. Could be a bad power cord for the microwave itself. I recently had a toaster problem. Bad wire right at the departure from the plug.
5/12/2015 5:02:25 PM • Sharp R-930AK... • Answered on May 12, 2015

Not Heating. Fan, turntable, light working.

I would definitely suspect the door locking mechanism in this case. If it was the sensor it would start and then stop within a short time.

The starter switch should click if you have the door open and time it for 01.seconds and press start. So that is the secon component to think of.
3/11/2015 3:43:46 AM • Sharp R-930AK... • Answered on Mar 11, 2015

Faulty microwave function on the SHARP R-957 model (900watt)

This is a problem in one of the damper-related components, most likely the switch, but it may also be the motor or the damper door.

The damper is a door inside that opens or closes depending on cooking mode. If the controller senses that the door is not in the right position, it will shut down the cook cycle.

Sharp models stop after 59 seconds.

See the attached sample photo for a typical damper assembly.

Info on ordering Sharp UK parts / spares is here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller
[email protected]

1/27/2015 2:15:47 AM • Sharp R-930AK... • Answered on Jan 27, 2015

Turntable sticking

grease that bad boy up

5/29/2014 6:42:59 PM • Sharp R-930AK... • Answered on May 29, 2014
Not finding what you are looking for?
Sharp R-930AK Convection/Microwave Oven Logo

164 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Microwave Ovens Experts

Jaime Hernandez

Level 3 Expert

2351 Answers

Cindy Wells

Level 3 Expert

6609 Answers


Level 2 Expert

122 Answers

Are you a Sharp Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sharp Microwave Ovens

  • Sharp Microwave Ovens

Most Popular Question

sharp convection microwave won 39 t

  • Microwave Ovens