I have a kawasaki ninja 400 and i just got the tag but i cannot locate where it goes i thought it went under the tag light but those 2 screws do not have the bolts to hold the tag in place

SOURCE: Power Wheels Kawasaki FFX Ninja...has a wire

It is by the stearing column.inside.If you have small hands put them inside and pull on a grey wire.that should be it.Called the help desk and they helped me with this.

SOURCE: how does a 2002 kawasaki ninja 250r act if the clutch isnt adjust

if there is no free play when pulling the lever in, the bike will most likely take off from first gear, but when you throttle it, the clutch will most likely slip. if the lever is to loose, lots of free play, you may have a hard time getting it in gear. approx 1/4 inch free play with the lever and it will work normal... unless its ready for a new clutch. hope this helps...

Ned C Cook

• 3433 Answers
• Posted on Jul 01, 2009

SOURCE: My daughter dropped her 2009 Kawasaki Ninja 250r.

Do what you have to do, Keep all your screws in a bowl or jar so you will know when you have them all back in. Look at each screw you take out and you will have a mental picture for reassembly. Don't take anything apart and walk away from it. It won't tske long if you stay with it until it's fully reassembled.. Good luck

SOURCE: would the fairing parts of a 2006 kawasaki ninja

Yes I do believe they do. Try going to Powersportseast.com Look in the shopping section on the left of the homepage. You will want to use the parts fische and load the info for your bike. It allows you to see what the dealer parts counter can see. See if this helps. I'm pretty sure the 250 ninja really didn't change until 2008 when it got the BIG overhaul

Testimonial: "Thanks Fixya"

SOURCE: where is battery located on the 04 kawasaki zx12r

To get to the battery you have to remove your Passenger and Rider Seat and Gas Tank Cover. You will see a small panel on the right side of the bike unbolt it and slide out the battery tray.