20 Most Recent 2003 kawasaki VN 800 A Vulcan Questions & Answers

0helpful
1answer

Kawasaki owners club

Some locksmiths can do this, otherwise I do believe its a whole new cap assembly. Hope that helps!
4/27/2014 2:49:14 PM • 2003 kawasaki VN... • Answered on Apr 27, 2014
0helpful
1answer

How to check oil on my bike

on the side of the bike there should be a glass like quater sized hole , right next to the motorcycles engine , if you hold the bike upright you should see the level of oil.
4/9/2013 8:01:13 PM • 2003 kawasaki VN... • Answered on Apr 09, 2013
0helpful
2answers

Oil

According to the Kawasaki site you should use SE class SAE 10W40, 10W50, 20W40 or 20W50 oil for the engine. You use SAE 10W oil for the front fork.
11/26/2011 4:28:28 AM • 2003 kawasaki VN... • Answered on Nov 26, 2011
0helpful
1answer

Rough ride due to skinny

the stock vulcan 800a comes with a 80/90-21, the first number is the width in mm, and the second number is the side wall ratio compared to height, the third number is the rim size. ex. the tire is 80mm wide and 90% as tall or 72mm on a 21" rim. So if you are going wider I would measure the distance between the forks in mm and go from there.
11/26/2011 4:14:38 AM • 2003 kawasaki VN... • Answered on Nov 26, 2011
0helpful
1answer

I have a 2003 kawasaki vulcan 800 running cobra

it is best to have the carb. jets changed for better perform. it my help the pipes from bluing also.you can go on line AT J AND P CYCLES .COM THEY MAY CAN TELL YOU WHAT SIZE JETS YOU NEED NOT SURE.
8/19/2011 2:18:18 AM • 2003 kawasaki VN... • Answered on Aug 19, 2011
0helpful
1answer

Oil type to use in kawasaki vulcan 800

i know the owners manual says sae 10w 40, but i found valvoline motorcycle oil at wal-mart for about $4.00 a quart works really well, it has the additives for all twin and wet clutch. they have it in several viscositys available.
8/18/2011 9:16:00 PM • 2003 kawasaki VN... • Answered on Aug 18, 2011
0helpful
1answer

IT WILL NOT START. NO FIRE TO ANYTHING. BATTER

not enough details provided. check the sparkling plug and check if the wires from the ignition are properly plugged.
2/28/2011 4:59:47 PM • 2003 kawasaki VN... • Answered on Feb 28, 2011
0helpful
1answer

Tire pressuree for front and back, I lost

If you are asking for tire pressure, use FR30-RR32 psi w/o passenger or put FR32-RR36psi if riding with pillion.
4/15/2010 5:48:34 AM • 2003 kawasaki VN... • Answered on Apr 15, 2010
0helpful
1answer
0helpful
1answer

I am looking fora1996 kawasaki vulcan 800a2 carb diagram

I just found the parts diagram for the 800A2 on http://www.kawasaki.com/Parts/PartsDiagram/29169/1996/VN800-A2. I hope this is enough for what you need. Good luck and happy riding.
5/17/2015 2:59:05 AM • kawasaki VN 800... • Answered on May 17, 2015
0helpful
1answer

Is it okay to run my 1996 vn800 on prime???

NO ! Prime is as it says , to prime fuel ! On or reserve is correct !!
2/1/2014 12:22:51 PM • kawasaki VN 800... • Answered on Feb 01, 2014
0helpful
1answer

Vulcan 800 only start in neutral

thats a saftey feature on meny import bikes
8/14/2012 5:12:31 AM • kawasaki VN 800... • Answered on Aug 14, 2012
0helpful
1answer

Is it possable to convert

There are a lot of differences between fuel injection and carbs.
the intake ports on the head may be different( another head required)
wiring loom is different, and will need the fuel injection computer
exhaust can be different
air box can be different
throttle cables can be different
fuel tank is different, and fuel pump
and a few more things I havent thought of.
Not certain if there is any commercial kit available.
Any thing is possible, but you would need to weigh up if its viable, and economical.
If you could find a similar injected model and swap all these parts you would have a slight chance of converting
8/8/2011 12:42:18 PM • kawasaki VN 800... • Answered on Aug 08, 2011
0helpful
1answer

I have spark and getting

if its a 2 stroke then you need fuel spark and air to get the bike to start have you got compression? check it by removing the spark plug and put your finger over the hole air try and start the bike your finger should be pulled into the hole if not then a piston ring is either cracked or broken

open the air box and check the filter then clean the carb thats all you need for a 2 stroke

if its a 4 stroke then again check the air filter and compression remember that a 4 stroke doesnt have the oil with the fuel it goes in a separate chamber

hope this helps


John
7/6/2011 10:21:58 PM • kawasaki VN 800... • Answered on Jul 06, 2011
0helpful
1answer

I put a new battery

Check your fuses
3/23/2011 11:12:07 PM • kawasaki VN 800... • Answered on Mar 23, 2011
Not finding what you are looking for?
2003 kawasaki VN 800 A Vulcan Logo

15 questions posted

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7015 Answers

mark woodring
mark woodring

Level 3 Expert

498 Answers

Jim

Level 3 Expert

1199 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

VN 800 A Vulcan kawasaki

  • VN 800 A Vulcan kawasaki

Most Popular Question

check oil bike

  • Motorcycles
Loading...