At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
didnt specify vehicle---generic answer flywheel is located bolted to rear of engine and is sandwiched between the rear of engine and transmission the starter is bolted usually towards bottom corner at rear or side of engine Starter enginestarter flywheel diagram Yahoo Video Search Results these links show various starter/flywheel locations
I don't have a diagram but the starter always has a connection to the battery. Follow battery connections and you will find the starter. It is always on the opposite side of the engine that the belts are on.
your starter will be located at bell housing going from engine side to gearbox or automatic transmission either left or right of engine if you follow your positive lead on battery should locate it goodluck
you really don't need one..... 1.Disconnect the battery 2.locate the starter. If its a v8 itll be on the driver side at the back of the engine beside the oil pan 3.there are two bolts on the bottom of the starter that you need to remove with a 9/16 socket or wrench.(support the starter when you remove the last bolt so the wires don't get broken) 4.observe the location of all of the wires attached to the starter(make a diagram so you don't forget where they go) 5.Remove the nuts that hold the wires on the starter.(make sure the ring connectors and wires are in good shape if you notice any damaged ones they should be replaced) 6. reverse procedure to install new one ..............hope this is helpfull.good luck!
assuming you have either a 2.0 or 2.3L engine the starter is located on the back side of the engine. You may have to remove the air intake tubes from the throttle body. It sits just under the intake on the transmission. If you need further clarification let me know
×