2001 Pontiac Grand Am SE Logo
Posted on Nov 09, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Insturmentation panel lights fuse blows when i start car

1 Answer

Duane Wong

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Pontiac Master 6,826 Answers
  • Posted on Nov 09, 2010
Duane Wong
Pontiac Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jun 20, 2010
Answers
6826
Questions
6
Helped
2862291
Points
20234

Try to remove the instrument panel and disconnect the harness to see if doing that gets rid of the blown fuse when starting the car. If it does, then the instrument panel should be replaced with another. If the fuse still blows when starting, then there is a wire shorted to ground somewhere.
---
Instruments and Switches Instrument Cluster Removal & Installation To Remove:

  1. Remove the instrument cluster trim plate.
  2. Remove the instrument cluster mounting screws.
  3. Rotate the instrument cluster rearward and lift up on the top of the cluster in order to disengage the locating pins.
  4. Disconnect the electrical connectors from the instrument cluster.
  5. Remove the instrument cluster.
To Install:
  1. Connect the electrical connectors to the instrument cluster.
  2. Position the locating pins to the holes in the instrument panel.
  3. Install the instrument cluster by rotating the top inward.
  4. Install the mounting screws.
  5. Install the trim plate.
insturmentation panel lights fuse blows when i - prev.gif

1 Related Answer

Anonymous

  • 132 Answers
  • Posted on Nov 09, 2010

SOURCE: when i start car it

Probably a short.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Fuse s under hood keeps blowing. It is the inj/coil fuse

Try jumping the starter with the key on. If it doesn't blow. Check the start wire for chafing and grounding out. You can pull the starter relay, Try to start it, see if it blows,yes, it is between the fuse panel and fuel pump. no. Put it in and pull the fuel pump relay. Start it. If it blows, then it is some where between the fuse panel and starter. If you have one of those intelligent fuse panels, it could be that also. You can have the codes read for it. But it takes a scanner, not a code reader.
0helpful
2answers

Door ajar light is on when all doors are shut, fuel guage reads empty and dummy light is on saying get gas, all lights in the rear do not work i.e. brake, running, reverse, blinker, hazards. 15 amp fuse...

your stop light switch is broken and shorting out hence it will not start in park ,or you have a fitted the wrong bulb in one of the back lights like a twin connector bulb in place of a single or visa versa ,which is blowing the stop light fuse ,with this fuse blown your stop light switch isnt working hence you cannot get it out of park .also flasher could be using the same fuse as the stop lights .side lights should work but if wiring is being shorted out then anything is possible
0helpful
1answer

Replaced blower motor, but still blowing fuse,

could be AC compressor clutch shorting out.try disconnecting AC compressor electrical connector and see if fuse still blows.
1helpful
1answer
0helpful
1answer

2002 Ford Ranger Edge Regular cab

check for a problem neutral switch and wires
may find that switch is loose and grounding out the wire connections or plug
0helpful
1answer

1986 RV blows instrument panel fuse when switch pulled

The headlight switch has a rheostat built into it to dim your dash lights, it may have shorted out. As soon as you turn on the switch this rheostat comes into play and is probably whats blowing the fuse. I think if you replace the headlight switch, it will solve your problems.
0helpful
1answer

Accessories Fuse Blows at Cold Start

i Would Have an auto parts store scan your OB2 Connection for codes on that issue !! Then go from there!!

We Are Here To Help !!!
0helpful
1answer

Fuse for instrument panel lights keeps blowing

fuse box location for a 89 pontiac bonneville
0helpful
2answers

Brake Light Fuse & Gas Gauge

Start by replacing your brake light bulbs. If it still blows the fuse, them your brake pedal switch. If it still happens then you have a shot circuit in your wiring between your fuse panel and your brake lights.
Not finding what you are looking for?

996 views

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...