20 Most Recent 1986 Ford Econoline Questions & Answers


have to chance the electrical part of the keyswitch.

1986 Ford... | Answered on Mar 03, 2018


It is possible you need a fuel pump or carb could be all gumed up from sitting around

1986 Ford... | Answered on Jul 10, 2017


The first thing to look at would be the fuse. The fuse must be in the main fuse box. The position and function of the fuses is normally marked on the inside of the fuse box cover and also in the owner's handbook. If you don't come right with these, work your way through the fuses looking for a blown one. To ease your search the pump fuse it should be around 30 amps.

1986 Ford... | Answered on Jan 06, 2015


It's called an "Inertia switch".. Its behind the kick panel on the passenger side. really small little red button. Just press it firmly to reset it.

1986 Ford... | Answered on Jul 26, 2014


Don't know what that switch would be, but sudden no starts are usually fuel or ignition spark related-one of them is not getting to the cylinders. See if you have a strong blue spark on a spark plug wire. If no spark, possibly a bad ignition coil or a bad TFI module on the side of the distributor.
If you have spark, see if pump is putting gas up to the engine.

1986 Ford... | Answered on Jun 08, 2014


Douglas, I don't have a clue what frolling over is? what do you mean? What is your vehicle doing or not doing? If you would like assistance please please please help us to help you by giving as much clearly stated information about your problem as possible. Regards John

1986 Ford... | Answered on Jun 07, 2014


First start would be to rebuild the carb, if its been sitting for awhile the jets probably need replacing.

1986 Ford... | Answered on May 10, 2013


Look on Passenger side firewall or side panel for a black box with a red button (reset button) it has 2 wires going to it. It is called the Initeria Switch, it is about 1/2 as wide as a pack of cigarettes.

1986 Ford... | Answered on Mar 12, 2013


If the light on your Kinect sensor will not turn on, it might be because it's not connected properly. ---------------------------------------------------------------------------------------
Renault CAN Clip Diagnostic Interface

1986 Ford... | Answered on Feb 25, 2013

Not finding what you are looking for?
Cars & Trucks Logo

164 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Econoline Ford

  • Econoline Ford

Most Popular Question

belts wont turn

  • Cars & Trucks
Loading...