20 Most Recent 2007 Toyota 4Runner Questions & Answers

If you're paying someone for a service, you can always ask a few shops what they would charge you. Every smart mechanic will consult a database to find out how many hours are billed as a standard rate to figure out labor costs and also find out what the part would cost. The cost of the part can vary and the cost of labor depends on the shop's hourly rate. You could pay a couple hundred or several hundred for a typical Chevy.
If you're charging some for installing a fuel pump in their truck, and you're consulting the internet on what you should charge, you won't be in business very long.

2007 Toyota... | Answered on May 14, 2020

if it has a digital odo/ press trip knob until odo is displayed/ press and hold , turn ignition , hold for 4 secounds , release and press again, number 10 will be displayed, keep pressing until 20 comes up, press until odo reading is displayed again, turn ignition off , turn on again , notice the t belt lamp turn off in appros 5 secounds / if not able to reset try this again

2007 Toyota... | Answered on May 14, 2020

go back to the dealer and get the user manual and the service and warranty book ( new car)
or is it an old car that is new to you
in which sweet talk a dealer salesman to show you what operates what

2007 Toyota... | Answered on Dec 11, 2017

i Would Have an auto parts store scan your OB2 Connection for codes on that issue !! Then go from there!!

We Are Here To Help !!!

2007 Toyota... | Answered on Aug 09, 2017

Check for power at the socket. If there is no power I would suspect the flasher relay wich supplies power to each bulb individually after it gets the right or left signal from the switch.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

2007 Toyota... | Answered on Apr 16, 2015

Of course , even the slightest shock can damage the mass air flow sensor and the idle valves inside the throttle body that would send messed up data to the computer and make the air/fuel mixture way out of the correct parameters - triggering engine troubles. You could even have broken wires that wouldn't sent the correct commands to the injectors or other sensors.
The truck must be thoroughly inspected for all of these.

2007 Toyota... | Answered on Feb 16, 2015

Switch? Steering column module? Buss connections?
Test all of these.

2007 Toyota... | Answered on Sep 29, 2014

check for a blow bulb on that side

2007 Toyota... | Answered on Aug 01, 2014

on top of the transfer box- looks like a windscreen washer motor!

2007 Toyota... | Answered on Apr 27, 2014

Not finding what you are looking for?
Cars & Trucks Logo

181 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

4Runner Toyota

  • 4Runner Toyota

Most Popular Question

horn stopped working

  • Cars & Trucks