Loction of cd changer plug - 1997 Mercury Sable

Stereo needs to be coded, but CD changer should still work without coding. Perhaps a dud.

Try pulling the fuse for the cd changer with the ignition on, and then plug it back in. If you are lucky you might reset the unit, otherwise the changer will likely need removed sent in for repair or replacement.

cd changer is grounded through the plug, And it should have it's own fuse -- so if you are not getting power to the unit, look for a in-line fuse to the changer itself.

c...

Reseat the connector behind the CD changer. Otherwise the changer needs to be serviced, there is a sensor to tell the unit CDs are present.

To put the original back in just hope the harness behind the radio wasant cut into. If its not it should just plug right in and mount back up in the stock location.

as far as the cd changer. if you would want to add one. you would need to find the changer, harness and headunit from a model with one.

i had sme prob remove the cd changer from dash disconect the wires plug them back in and that shoud fix it as for directions to removeing the changer the istructions are on the net.

that cd button is for an external changer that you must install yourself. once you install the the changer then all you have to do is press that button and through the circuit you can get your cd music.in order to install the changer you have to purchase a link cable to the the vehicle from the changer. you will not have to cut or splic any wires at all get the connector cable and the changer and once installed your all set. the plug in for the changer is in the trunk of the vehicle. now you will not have access to insert the cds while driving because that is not how the system works in a conventional sense like a cd stereo does

ITS YOUR CD PLAYER ITS BUGGERED MATE,,TRY EBAY £65-£120

cd rack should pull out when you press the button down

The plug is in the back where the trunk is, that's where mine is.