Mercury Cars & Trucks - Recent Questions, Troubleshooting & Support

Make sure that the shifter cable is on tight to the transmission lever and that there is nothing, blockage, keeping it from working.
If all looks ok, then disconnect the linkage from the transmission and see if it will move into the Park. If the shifter does, then check to see if you can shift the transmission manually into park. It just might be a little out of adjustment.

Mercury Cars &... | Answered on May 22, 2020

The PowerPoint is the second cigarette lighter located on the dashboard below the climate control, the PowerPoint fuse is used to power it.

2001 Mercury... | Answered on May 21, 2020

Did you get the correct alternator? Try to disconnect the alternator then charge the battery keep in mind the battery is probably bad after exploding and will cause all sort of problems. If unplugging the alternator works take it back and exchange it or have them bench test it and replace the defective voltage regulator. I hope this helps. Take care.

Mercury Cars &... | Answered on May 16, 2020

perhaps inside the fuel tank

Mercury Cars &... | Answered on May 16, 2020

Number 1 is first next to arrow on dis. picture.
Next the white on dis. cap goes on 3
If you have any problems let me know ??

Mercury Capri... | Answered on May 09, 2020

I would love to help you with this but I'm not really good at it, sorry.

Mercury Cars &... | Answered on May 05, 2020

Ur fuel delivery cud hav issue. Clean carb w BG sold in boatshops. Inspect ignition components fir wear. Buy a clymer or haynes manual for conplete repair

Mercury Cars &... | Answered on Apr 30, 2020

Despite your car having an AUX button, you will be disappointed to know this menu is not operational as there is no AUX jack.

2006 Mercury... | Answered on Apr 29, 2020

I found this in your owners manual, but, use dipstick or site plug for final say.

Mercury Cars &... | Answered on Apr 26, 2020

Clean the intake manifold.

Mercury Cars &... | Answered on Apr 23, 2020

The trick is to wrap the belt around all the grooved pulleys first and leave the smooth idler pulleys for last. Then the belt can just slip on the smooth pulley

Mercury Cars &... | Answered on Apr 19, 2020

in your owner manual and usually in fuse panel. You have a fuse panel in car and under hood.

in car

Mercury Sable... | Answered on Apr 14, 2020

Mercury Cars &... | Answered on Apr 13, 2020

Not finding what you are looking for?
Mercury Logo

32,929 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mercury Experts

gerry bissi

Level 3 Expert

4388 Answers


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides