Hello,
Ensure the battery conection is good...clean the battery conection thouroghly and re-connect. If you have a volt/Ohm meter, the resistance between the post and the terminal, should be less than 5 Ohm's.
On another note; the POS battery terminal is also the input to the ECM...a bad connection could eventully cause a check engine light and can also cause a total intermittent electrical failure (symtoms would be a bump that could occur two or three times in a five mile trip and not be consistant; meaning the same trip the bump might happen seven times...or not at all),
Thanks for trying Fixya.com
Mike...
160 views
Usually answered in minutes!
×