20 Most Recent 1998 Dodge Intrepid Questions & Answers

When does this occur? If when going over bumps, probably a worn out and dry control arm or stabilizer bushing; if all the time while the engine is running, probably the drive belt on the engine.

1998 Dodge... | Answered on Sep 30, 2019

When it die's check to see what's missing ! Spark or fuel pressure .Then diagnose which ever system isn't working . Check for B+ voltage at a coil and a fuel injector ,don't know how much you know about automotive electrical systems . If no B+ voltage the ASD relay maybe going bad . Do you know what a wiring diagram is , how to test electrical circuit's with a DMM - digital multi-meter ? No Start Diagnostic Basics EricTheCarGuy

Free wiring diagrams here http://www.bbbind.com/free_tsb.html
Enter vehicle info. year , make , model an engine size. Under system click on engine ,then under subsystem click fuel controls . Click search button then the blue links . When it die's check B+ voltage an ground circuit's , you have to find what is missing !

1998 Dodge... | Answered on Nov 21, 2017

You will need to contact a salvage yard and have them look it up in their parts crossover manual. Be specific about what parts you need.

1998 Dodge... | Answered on Apr 07, 2016

Yes it has a factory system.

1998 Dodge... | Answered on Apr 07, 2016

Mary, 1998 to 2004 fender and bumpers will interchange, some bumpers had fog lights. press the helpful button

1998 Dodge... | Answered on Feb 16, 2016

Don't know on your engine, but usually on or near thermostat housing or intake manifold. Note: you may have two, one with one wire for the dash display and one with two wires for the ECU.

1998 Dodge... | Answered on Aug 03, 2015

Its behind the front pulleys,behind the timing chain/belt cover.

1998 Dodge... | Answered on Jun 02, 2015

I have had this problem myself it turned out to be a blocked exhaust system. Too much back pressure in system blocking the flow causing the power loose

1998 Dodge... | Answered on Mar 28, 2015

loss of bus voltage,modules may not talk to each other or be diagnosed til repaired probably open circuit.

1998 Dodge... | Answered on Mar 17, 2015

jack up the car and remove the front tire.then remove the inner fender liner.then remove the tank after the electrical connector and the sprayer lines have been disconnected. insall the new pump and reinstall in reverse of removal.

1998 Dodge... | Answered on Feb 23, 2015

Not finding what you are looking for?
1998 Dodge Intrepid Logo

509 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Dodge Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Intrepid Dodge

  • Intrepid Dodge

Most Popular Question

1998 intrepid 2 7 engine problems

  • Cars & Trucks