1995 Chevrolet Corsica Logo

Related Topics:

A
Anonymous Posted on Apr 27, 2014

Ignition is stuck in the ON position,put key in and it wont turn off or start engine

5 Related Answers

Anonymous

  • 9 Answers
  • Posted on Sep 03, 2008

SOURCE: unable to turn the key in the ignition (locked)

Try wiggling steering wheel very hard back and forth while trying to turn ignition on it may be jammed and needs turned back and forth to break it loose

Ad

Jerry Parmanand

  • 449 Answers
  • Posted on Dec 17, 2008

SOURCE: key stuck in ignition

change the key cyclinder thats where the problem is.

Anonymous

  • 957 Answers
  • Posted on Apr 25, 2009

SOURCE: Key stuck in ignition of 1976 chevy corvette stingray 350 auto

If I understand, the key will not rotate to all of the normal positions? If this is true, then I would guess that the trani didn't fully return to the park position please verify, You can check the ignition switch(the one that is half way down the steering column) for defects. Is there any binding, does the rotate freely? Thank you; good luck.

Anonymous

  • 187 Answers
  • Posted on May 10, 2009

SOURCE: key stuck in ignition. Won't turn to the off position

Sounds like a very warn out lock and tumblers. Try angling the key as you turn the lock.

adve1958

marcial adorno

  • 246 Answers
  • Posted on Sep 08, 2009

SOURCE: 2005 Chevy Impala ignition switch stuck in off position

if it doesnt turn you have a worn out ignition cylinder, the only fix is to replace it, Code the ignition lock cylinder, if necessary

CAUTION:Perform the body control module (BCM) theft deterrent relearn procedure whenever you replace the ignition switch lock cylinder.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Key wont go in to lock position. Now, battery has 13 volts but car wont start all lights come on 2006 monte carlo

To remove key (lock position), the transmission needs to be in PARK.

To start (engine crank), the transmission must be either in PARK or NEUTRAL.

Try apply parking break, put transmission in neutral and turn ignition key. If engine does not crank, turn and hold key in start position then move transmission selector to see if there is a transmission select position where it does crank.
0helpful
1answer

My key is stuck in the ignition.

Your car has several different ignition positions. They each offer slightly different functionality.
Off: In this position, the engine is off, and so are your electronic accessories (unless the delay has not expired yet). You can still turn on lights (headlights, interior lights, etc.).
ACC: This is the accessory position. Turn the key to ACC if you want to listen to the radio, play a CD or use other accessories without cranking the engine.
On: In this position, all of the electronics should come on. This is also the position that the key will return to after cranking the engine.
Start: Turn the key to this position to crank the engine. Let go of the key when the engine is running and the key will return to the on position.

http://www.aa1car.com/library/ignition_switch_positions.jpg

I use to own a car that had an ignition that was ACC - OFF - ON - START.

Try turning your ignition one position clockwise and see if the radio turns off and the key comes out.

https://hackadaycom.files.wordpress.com/2008/08/ignition.jpg?w=450&h=338
0helpful
3answers
0helpful
1answer

Key stuck ignition wont

This usually happens if your steering wheel is in the rightmost or the leftmost position. Try wiggling the steering wheel when pulling out the key.
0helpful
1answer

89 chevy corsica key stuck in the run position

ignition switch keylock cylinder is broken.
0helpful
1answer

Lost the remote, since the alarm was activated the car wont start even though i still have the key. everything turns on except the ignition. is there a bypass. i am stuck out of town.

1.try find on the drive's foot panel or under the steering wheel,see any switch. if you find the switch trun key on position and trun off the switch. 2. put key in passenger's door Lock it and Unlock , and put key back in the ignition try to start it. 3.turn key on position and unhood the (-) battery cable for 10 seconds , put it back and start. it.
3helpful
1answer

Turn ignition key and motor starts up, next day turn ignition key and motor just turns over and wont start. could it be anti theft problem its a 2002 f150 4 wheel drive with 4.6 liter

This could be caused by either a faulty Crank Shaft Position Sensor or the anti-theft system. Try put key in, turn to ON position for EXACTLY 10 minutes, As SOON as anti-theft light shuts off or stops flashing, then IMMEDIATELY start the engine.
1helpful
2answers
0helpful
1answer

2002 oldmobile bravada ignition key is stuck in lock position

try and turn your steering wheel a little bit left or right and and the same time try and turn the key when it turns toward the dash then try and turn the key back. try and repeat this several times if neccessary. this should work. please rate this solution. thanks
0helpful
2answers

Key Stuck

Try a different key, if that doesn't work replace lock cylinder.(commom)
Not finding what you are looking for?

40 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...