20 Most Recent 2008 Saturn VUE Questions & Answers

1. Switch off the car
2. Pop up the hood and raise it
3. Locate the transmission fluid cap
4. Remove the cap to add fluid
5. Check the owner's manual on what type of fluid your car requires and in what quantity. It is essential to use the right fluid and not anything off the shelf.
6. Remove the dipstick and start filling up the fluid slowly - you don't want to add too little or overfill.
7. Now put back the dipstick, switch on the vehicle and start shifting gears. Remove the dipstick and see the marking to know if you your car has the right amount of fluid
8. Put back the cap by turning it clockwise.

2008 Saturn VUE | Answered on Mar 30, 2020

your vechicle has the electronic power steering.which is controlled by power steering module the power steering module receive information from the torque sensors in steering wheel and vechicle speed sensor.when speeds are slowest the steering input that tracks the amount of power assist.THIS TYPE POWER STEERING UNIT DEALERSHIP FIX NEED DIAGNOSTIC EQUIPMENT TO WORK ON THEM.

2008 Saturn VUE | Answered on Mar 23, 2020

If you have too much money, I will take some off your hands. All season tires are all season tires. If you want snow tires get a new set of rims then keep snow tires in your garage for the winter and all season tires for the rest of the year. If you cant drive in the snow cant help you with that.

2008 Saturn VUE | Answered on Apr 15, 2019

your battery has the volts but not the amps. Get the battery load tested. how old is the battery?

2008 Saturn VUE | Answered on Mar 28, 2019

Sounds like a security system issue. Using the key fob to lock and unlock the doors will usually reset the system. You may have to do this procedure a couple of times and see if it works

2008 Saturn VUE | Answered on Nov 21, 2018

Pressure has built up in the system possibly from a clogged orifice tube/expansion valve. Replace the orifice tube/expansion valve, thenPull a vacuum on the system and recharge.

2008 Saturn VUE | Answered on May 12, 2018

At this website www.reliable-store.com I found all complete guide,much better language, complete detail in 800+ pages, ..and
they also have live chat for instant help feature

2008 Saturn VUE | Answered on Mar 09, 2018

That's usually caused by a misadjusted push rod going into the master cylinder OR a misadjusted brake pedal switch. When either are out of whack it won't let the master cylinder piston return all the way to home, so it covers up the relief port in the M/C. As the brake fluid heats up and expands it can flow back through the relief port, so the pressure continues to build and it actually applies the brakes.

2008 Saturn VUE | Answered on Oct 03, 2017

Lot's of warning lights , check engine and all the others , You should have the vehicle checked for DTC'S - diagnostic trouble codes . Lost power codes probably ! Could be a number of thing's ,ignition switch , BCM - body control module just to name a couple . DTC'S will point in the right diagnostic direction . The electronic's on your vehicle Are complex to say the least .
The body control system consists of the body control module (BCM), communications, and various input and outputs. Some inputs, outputs and messages require other modules to interact with the BCM. The BCM also has discrete input and output terminals to control the vehicle body functions. The BCM is wired to the GMLAN High speed serial data buss and the GMLAN Low speed serial data buss and acts as a gateway between them. If the BCM does not communicate the vehicle will not start due to the inability of the engine/powertrain control module (ECM/PCM) and vehicle theft deterrent (VTD) control module to communicate without the BCM providing the gateway function.
Power Mode Master
This vehicles BCM functions as the power mode master (PMM). The ignition switch is a low current switch with multiple discrete ignition switch signals to the PMM for determination the power mode that will be sent over the serial data circuits to the other modules that need this information, and so the PMM will activate relays and other direct outputs of the PMM as needed. Refer to Power Mode Description and Operation for a complete description of power mode functions.
This is something you should have checked out by a qualified repair shop .

2008 Saturn VUE | Answered on Aug 05, 2017

take back to th GM dealer as they must guarentee there work for 12 month's

2008 Saturn VUE | Answered on Jun 05, 2017

reset the ERCM using a scan tool
while the brake pads looked fine , the rotors should be removed as that gives the same impression as the abs in operation
there could be a cracked rotor causing the noise
take it to an accredited brake specialist shop

2008 Saturn VUE | Answered on Jun 01, 2017

possible that there is an issue with the torque converter clutch servo/solenoid operation
take it to an accredited service center and have it properly diagnosed

2008 Saturn VUE | Answered on Apr 23, 2017

Not finding what you are looking for?
2008 Saturn VUE Logo

466 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2003 Saturn VUE
2003 Saturn VUE

1,187 Questions

2004 Saturn VUE
2004 Saturn VUE

691 Questions

2002 Saturn VUE
2002 Saturn VUE

498 Questions

2006 Saturn Vue
2006 Saturn Vue

451 Questions

2005 Saturn VUE
2005 Saturn VUE

366 Questions

Top Saturn Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Vue Saturn

  • Vue Saturn

Most Popular Question

ac not blowing cold low pressure high

  • Cars & Trucks