Where is the blend door actuator located I can feel air out of the defrost vents but nothing from the vents on the console to get air to face.
SOURCE: no air flow to dash vents and feet vents
99% of the time when they do that it is the control head. that is the thing you adjust all your temp settings on. have to purchase from dealer. have last eight digits of vin # when ordering.
SOURCE: on my 1995 chevy blazer s-10 my face vents are not blowing air
the vacuum on the rear of the engine that goes to the vacuum ball mounted n the hood may be disconnected
SOURCE: 1995 Chevy k1500 heater problems.
For a 95 Chevy Silverado....I replaced the Blend Door Actuator on the passenger side. Just behind the slide out cup holder. Yo ucan acces easily by removing the ash tray piece and the glove box....Or just the glove box and work like hell to get a socket in a tight place.
There are 2 actuators....one controlling the (Mode and Temp 89018681) and the other the (Air Inlet 89018367). I called the dealer and the parts were 85-125. I got it From TBA Auto (local store) for 39.00. A 20 min job at most.
SOURCE: 2000 Chevy Silverado 1500 The heater does not
Had the same thing happen to my truck, the blen door actuator is under the console on passenger side, but the heater core is going to be clogged if you dont have any heat coming through, but a/c works..
2,449 views
Usually answered in minutes!
×