20 Most Recent 1997 Chevrolet Tahoe Questions & Answers

try to drive on gravel and hit brake hard to make sure the ABS pump run then try to bleed again

1997 Chevrolet... • Answered on Mar 12, 2019

fouled plugs this engine hard to start with fouled plugs replace

1997 Chevrolet... • Answered on Nov 24, 2018

hello my wife has came home and said she smell gas so started the truck and the sending unlt rusted out and pumped gas on the driveway. so i replaced the tank and the sending unit and also changed out all the lines and filter up to fierwall all three lines are from a kit and fit well. i reused the year old bosch fuel pump .the truck seams like the fuel pump is bad again. i have 55 to 60lbs and does not change much has i rev the engine. the truck starts right up and does not miss abeat and idales great.the fuel pressure does not fall when i shoult off the truck and held 50pis for about 30min and slowly fell so i dont thing there is any leaks at the spider . i through that the cats are plugged but they are only 1 yery old and has a magnaflow system. anyway i did a vacume test at the intake and started to rev the engine and pulled a hard increse . i owned this truck all of it's life and has only 76000 miles . i have no check eng lights and all 4 of 02 sensors are acdelco and were change when installed the exchust .still bogs at 2200-2300 rpm

1997 Chevrolet... • Answered on Nov 10, 2018

I'm assuming you replaced the fuel filter when you did the pump.You'll have to try to figure out if you are loosing fuel to the injectors or spark to the plugs to proceed. Its possible something is failing inside the distributor among other things.I'm also assuming you have checked the computer for trouble codes.

1997 Chevrolet... • Answered on Feb 03, 2018

Only two reasons for this first is its below 0 outside the next is blown head gasket. Now thats WHITE smoke.ONLY.If it smells sweet like anti freeze that confirms head problem. black smoke is fuel, blue smoke is oil. sorry hope this helps TIM

1997 Chevrolet... • Answered on Jan 08, 2018

Not 100% sure if this will help but go here and see... if you already haven't. https://www.etrailer.com/question-186418.html Best of luck.

1997 Chevrolet... • Answered on Dec 27, 2017

You have a wiring issue. Look for melted or cracking insulation all around the engine harness and on the the pcm.

1997 Chevrolet... • Answered on Nov 02, 2017

Rather then guessing an just replacing parts ,having a qualified repair shop hook up a professional scan tool an view engine management system data . This would be the best thing to do . What are the fuel trims showing (short & long term ) Are the O2 sensor's switching normal , Map sensor data .MAF 002 Fuel System Tests Start Here 003 Fuel System Tests Scan Data Tests

1997 Chevrolet... • Answered on Oct 30, 2017

it just a basic tools. find the filter and see what size it is.crawl under the truck on the driver's side, follow the fuel line from the fuel tank to the filter(shape:cylindrical).make sure the line has no pressure. you should pull the fuse for the "fuel pump" relay, then start the engine and allow it to stall.

1997 Chevrolet... • Answered on Oct 30, 2017

https://s26.postimg.org/j6u1vxn61/ignition.jpg Click on the link. I don't know what testing you've done? How long since a tune-up? Any applicable trouble codes? To check codes yourself, at the least, you need an obd2 code reader. In the diagram, see the pink wire at ignition coil, that is primary voltage to coil, with key on, use a test lite and see if there is voltage? If no voltage, that circuit is fuse protected, I believe ecm 1 fuse, under hood fuse block. You need to do some testing and tell us what you find?

1997 Chevrolet... • Answered on Sep 23, 2017

check wire connections where work was performed.

1997 Chevrolet... • Answered on Sep 19, 2017

There are a couple other componets you are probably not aware of . The daytime running lamps module an the DRL relay . Rather then guessing or wondering as to the problem , leaning how to test electrical circuits using a wiring diagram an a DVOM - digital volt ohm meter is the preferred way to fix automotive electrical problems . This is how professional technician's do it , well a few probably . They'er are a few that just replace part's . Here is a web site for free wiring diagrams http://www.bbbind.com/free_tsb.html Enter your vehicle info. year , make , model and engine size. Under system click on lighting , then under subsystem click on head lamps .Click the search button ,then the blue links one at a time . Watch these videos Basic Electricity for Service Techs Ohm law Current Flow Opens Shorts Electric Testing Techniques You Need to Know Now get out there an test .

1997 Chevrolet... • Answered on Sep 13, 2017

The first thing that needs to be done here is to have the engine control module scanned for fault codes, based on the results then move on.

1997 Chevrolet... • Answered on Jul 17, 2017

White smoke coming from the exhaust system is a sign of an oil system problem. If you did not have this issue and no other signs of an oil system problem, I would agree that the sending unit may be the only issue and needed to be changed. However, since you have been told that smoke is coming out of the exhaust and the car is acting up under load (going up a hill) it is time to take action and make sure your oil pump gets checked ASAP. Before you dive in you may want to check the oil on the dipstick to see if it looks/feels thin or watery. If that is the case, you may have other issues like water in the oil system from a bad head gasket - water looks like bubbles on the dipstick. If oil of the wrong type was used, the problem may be that the oil is too thin to work properly and needs to be replaced. If the oil looks fine and feels like its got the right consistency, the problem may just be with the oil pump. You didn't mention it but have you noticed the vehicle running hotter than normal? If so, this is another clue that the oil pump may be failing. Whether the oil itself appears to have issues or not, you still need to have the pump checked. .

1997 Chevrolet... • Answered on Jul 09, 2017

Does the starter make any sounds when you hit the key and it doesn't start? If you need further help, I’m available over the phone at https://www.6ya.com/expert/david_4c166ba81493f541

1997 Chevrolet... • Answered on May 10, 2017

Hello Alexsandra, When you first start off your engine is going from idle to requiring more fuel and air to provide the power needed to get you going. The first place to start would be to check for a flashing instrument panel check engine light or as it is sometimes referred to a SES light (Service Engine Soon) and having your vehicles computer checked for stored fault codes. "Could Lucas Help" ...I'm not sure what you mean...What or who is a Lucas?

1997 Chevrolet... • Answered on Apr 27, 2017

Assumming the compressor is the problem - You will need to capture the current gas and recharge the system after replacement - you will need to take it to an air-conditioning specialist first to have this done.

1997 Chevrolet... • Answered on Apr 26, 2017

Not finding what you are looking for?

960 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

john h

Level 3 Expert

23884 Answers

Joe Taylor
Joe Taylor

Level 3 Expert

2228 Answers

Ryan Lutton
Ryan Lutton

Level 3 Expert

1266 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Tahoe Chevrolet

  • Tahoe Chevrolet

Most Popular Question

his remove headlamps head lights from

  • Cars & Trucks