Cars & Trucks Logo

Related Topics:

Ron van Posted on Sep 14, 2013

I am trying to remove the rear seats in a Mitsubishi 380 sedan to put on seat covers, how is this done?

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Aug 14, 2008

SOURCE: remove the rear seats

The fuel pump is not under the back seat.but if you still wanyt t remove it just look beteen the seat and the floor carpet the is a little piece of flat metal sticking out, use a pliers or vise grip to hold it and pull forward while push the seat up at the same time. Mine was a little stiff but it did come out.

Ad

Anonymous

  • 104 Answers
  • Posted on Mar 15, 2009

SOURCE: GS350 rear seat removal

You can remove your rear seat cushions if you place your hand under the seat cushion you should be able to feel a hook. lift the seat up a little bit and you should be able to release the hook.

mkv0525

Mike Vincent

  • 358 Answers
  • Posted on May 22, 2009

SOURCE: How to remove the head rests on the front seats of

there is a small push in clip at the bottom of one of the small chrome shafts. you push it in while you pull the head rest up.

mkv0525

Mike Vincent

  • 358 Answers
  • Posted on May 27, 2009

SOURCE: I need to remove the rear seats to get into the trunk

you pull up on each side of lower seat, it will pop up on each side.after removing that you will need to unbolt the backs at the bottom of seatbacks and then you need to push up to unhook the top of seatback and that should do it.

Anonymous

  • 185 Answers
  • Posted on Oct 20, 2009

SOURCE: remove rear seat lexus es300 2008

the bottom of the rear seat pulls straight up at the front and out. its pretty tight, you need to pull very firmly.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

How do I get to the top bolt on the rear shock on a 2012 lincoln mks

Check in the trunk near to the back seat backrest and the carpet may cover it. There may be plugs over the access holes also.
0helpful
1answer

How do I remove the rear bench seat on a Galant 2010 to install seat covers? Thanks

push back firmly at front of seat at bottomlocating clip released with upward preasure
2helpful
1answer

MITSUBISHI 380 VRX 2008 How do you remove the headrest

Neither of the answers are actually correct.
Yes you need to press the button PLUS use a number drill or similar in the little hole on the opposite headrest leg @ the same time. The headrest will come out very easily when you do bothe these things @ the same time.
4helpful
1answer

How do I remove the front seats in a 96 sedan deville

Hello: Move seats all the way forward, raise seat up as far as it will go. Remove covers over seat tracks in rear(go through the back door on each side) remove 15mm nut or bolt on each track, pick up rear of seat far enough to release the front hooks pull seat back and lift seat out of car. Make sure you disconnect the power seat wiring after you get the seat positioned for removal. Prior to removing seat. Also disconnect the side air bag wiring (yellow) if equipped.
2helpful
1answer

How do you remove the rear seat in a 2002 Mercedes C240?

please check below the rear seat you can see small plastic cover have fitted near seat it's same color of your interior carefully remove that plastic covers without braking locks then you can see bolt for remove rear seat cushion remove bolts and slide the cushion towards front.
4helpful
1answer

I need to replace a rear seat belt in a 1997 Ford Tarsus. Does any know the best way to access the assembly? In addition, are there any diagrams available that show the connection points?

please don't forget to rate, thx.

Retractor and Tongue—Sedan
SPECIAL SERVICE TOOL(S) REQUIRED Description Tool Number Safety Belt Bolt Bit T77L-2100A
NOTE: Safety Belt Bolt Bit T77L-2100-A should be used for safety belt removal and installation.

Removal
  1. Remove rear seat cushion. Refer to Section 01-10 .
Seat Cushion, Rear Sedan
Removal
  1. Apply knee pressure to lower front portion of the rear seat cushion. Push rearward to disengage rear seat cushion pad and frame (600A88) from rear seat cushion front retainers (63370).
  1. Remove rear seat cushion from vehicle.
  1. Remove rear seat back. Refer to Section 01-10 .
Seat Back, Rear 60/40 Split Bench—Sedan
Removal
  1. NOTE: Safety belt bolts do not secure seat back to vehicle.

    Remove rear seat cushion as described.
  1. Fold down back seat and remove two bolts in the center of each seat back striker plates.
  1. Remove two bolts from outboard rear seat back frame retaining brackets.
  1. Lift seat back up and pull forward to remove from vehicle.
  1. Remove panel (52018) and quarter trim panel (31012). Refer to Section 01-05 .
Trim Panel, Quarter—Sedan Removal
  1. Remove rear seat. Refer to Section 01-10 .
  1. Pull up on rear section of rear door scuff plate that overlaps lower quarter trim panel.
  1. Pull lower quarter trim panel away from body.
  1. Remove safety belt retaining bolt.
  1. Feed safety belt through lower quarter trim panel.
  1. Remove safety belt anchor plate-to-sill bolt from quarter panel.
  1. Remove retractor anchor nut and retractor from rear quarter panel.
  1. Remove upper seat belt anchor bolt and anchor from upper rear quarter panel.
  1. Slide anchor plate end of safety belt through the openings in the quarter trim panel.
  1. Remove outboard front safety belt retractor and tongue (611B08) from the vehicle.


    2a6fac0.gif


    Item Part Number Description 1 386277-S190 Bolt (Part of 611B68) 2 31012 Upper Rear Quarter Trim Panel 3 611B60 Retractor and Tongue 4 N800937-S190 Nut 5 389370-S190 Bolt 6 — Rear Quarter Panel (Part of Body) 7 52018 Lower Rear Quarter Trim Panel 8 — Mounting Stud (Part of Body)
  1. Remove seat belt anchor bolt and retractor and tongue from rear deck panel.


    fff90b0.gif

Installation
  1. To install, reverse Removal procedure.
  1. Make sure the safety belt webbing is not twisted. If it is, remove the twist.
  1. Tighten retractor anchor bolt and safety belt anchor plate-to-sill bolt to 34-46 Nm (25-33 lb-ft).
  1. Check the restraint system for proper operation.
0helpful
1answer

Mustang rear seat removal?

please rate highly if this is what you need

Section 01-10: Seats and Tracks 1994 Mustang. Workshop Manual
REMOVAL AND INSTALLATION Seat Cushion, Rear Removal and Installation
  1. Release pin from locks by pressing release button under rear seat cushion.
  1. Pull rear safety belt and buckle (60044) through openings in rear seat cushion pad and frame (600A88) and remove rear seat cushion pad and frame .
  1. To install, reverse Removal procedure.
----------------------------------------------
Section 01-10: Seats and Tracks 1994 Mustang. Workshop Manual
REMOVAL AND INSTALLATION Seat Back, Rear Sedan
Removal
  1. Remove rear seat cushion as outlined.
  1. Remove rear seat bolster. Refer to Section 01-05 .

  1. Remove rear seat bolster mounting bolts. Remove bolster assembly.
  2. Remove four seat back to package tray retaining bolts.
  1. Remove seat back.
  1. To install, reverse Removal procedure.
0helpful
1answer

Peugeot 406 SV rear seat removal

take it you have done it------- two brackets at front of seat
2helpful
1answer

Driver's Seat Removal

There are four bolts holding the seat to the floor. Slide the seat all the way forward and you will be able to see the two bolts which are at the rear of the seat slide rail. They are 14mm bolts, remove them. Slide the seat all the way back and remove the two bolts at the front of the rail. Once the bolts are out removed tilt the seat towards the back, it should lift the seat bottom easily and you can find your flash drive. Be careful not to push the seat too far back as there may be a wiring harness to damage. Once you retrieve the flash drive, put the seat back down and put the bolts back in.
1helpful
2answers

1998 honda civic ex sedan

remove rear seat, remove round metal cover, disconnect fuel lines and wires from top of fuel pump, jack up rear of car. remove gas tank straps, lower gas tank with a jack, install is reverse.....if you need to just replace the fuel pump you don't have to remove tank you Can access from under rear seat good luck and please rate -jeff
Not finding what you are looking for?

1,249 views

Ask a Question

Usually answered in minutes!

Top Lexus Experts

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...