Questions & Answers for: zhone znid

Changed router ip now unable to connect... Hi I have a zhone 6218 and I was having a conflict with ip addresses (zhone and linksys were both set to 192.168.1.1) so I changed the zhone to 192.168.123.1

Zhone 6211-I3-200 Help me!.. I need the User and password of the router... and too I need the drivers Zhone 6211-I3-200 please.. user: user password: user firmware update: www.zhone.com

zhone 6218 i have zhone 6218 wireless 4 ports router i installed wrong software for it then it's red lamp kept a light and wireless didn't work till now i tried to reset it again but still have the ...

Mtu setting how do i change the mtu setting on my zhone 6218-I2-200 router? Hi, maybe the manual of that router helps a bit: http://www.zhone.com/support/manuals/docs/62/6218-A2-ZB23-10.pdf

Need login and password for a Zhone router/modem Model #:6218-I2-200-0CC. If you got your Zhone modem from consolidated communications then the login is admin pass is cciadmin

how to enable upnp with zhone router hello, this picture should help ya. http://screenshots.portforward.com/Zhone/6381-A4-200-1PR/UPnP.htm

How do I change the mtu setting on a zhone modem Give a try at Zhone ' Support ' Tools

...using xp works fine with a modem from motorola(SB5101). But it does not make conection with a zhone bridge router 6211 I3 200 OPA The zhone router makes good conection with a laptop using ...

...Zhone ZNID-GPON-2516-NA, S/N 302111723 I dont have the user manual you have to http://www.zhone.com/support/downloads/firmware/ZNID-GPON-25xx/ use this official service for registration and download ...

...zhone/znid-gpon-2426-uk/manual-1298.pdf There is no UPNP on this router. The best you can do is put it into bridge mode and add a router on the LAN to do port forwarding as it is not possible on the ...