Questions & Answers for: z2 report

register has frozed up my register has frozed, and all it say is x2z2. What is I to do finish the X2-Z2 report.

...report mode (Z2) for a yearly report. Try turning to Z2 then press 1 then CASH. Make sure the top of the report shows 'Z2' and not 'X2'. If it shows the X then it probably hasn't been setup for ...

...you turn the key to Z mode, then press CASH, it should print a daily report. If it has been setup for periodic reports, then you turn to Z2, press 1 then CASH and it should give a weekly report. ...

...say you probably have main board failure in the machine. Mark check your report. if you see top of the receipt will print x. z.or z2 if you see z2. it.s nothing wrong. you just made periodic report. ...

...report of sales.. not the total monthly sales. It depends which brand and model. Most have a Z1 and Z2 position. If you want a daily, turn to Z or Z1, not Z2. If you want more info, let me know the ...

z 2 key will not give nights end readout It depends upon the programming of the reports section, but the Z2 mode is usually reserved for periodic reports such as monthly. Z1 is for daily reports

can i run a report of all historical Z2 reports this year Yes you can as long as your do not use it all year

...Z2, press decimal point before cash). Note: If you have never used the second report it will have a large total built up. you will need to reset it as above to clear it and then it will be correct ...

in X2/Z2 mode, so try printing an X2 report while the key is in the x2/Z2 position, then after report prints, turn key back to REG. If it is still stuck in X2/Z2 mode, the mode lock is probably faulty

...I do to get a z2 report. Hi. Spray a little WD40 into the key lock then turn the key back and worth to work it in. Common problem after spillage. If it still doesn't work, have it checked for