Questions & Answers for: yellow cord light blinking toshiba

...cord - there are two small LEDs, one green and one yellow (no need to open the case - you can see them through the cooling slots). In my case, the green LED would light for a few moments after ...

cord plugged in the screen goes black, the power light blinks yellow, the machine will not start again even from power. The machine is completely cool. When I first ran into the problem, I changed all

...yellow flashing light at the power cord icon in front of the laptop. I have tried to reseat the processor, memory, hard drive, etc.(nothing). I am wondering if its the power strip or connections on ...

...cord I can pull out battery adn unplucg and get two green lights sometimes - othertimes when I switch it on i get blinking yellow light on the power led can't get it to the full green lights or ...

...cord light, and a yellow light under the battery label (indicating its charging) this works vice versa. i let the battery charge till the light turned green, then i press start. The green power cord ...

...Power up. Plug in power cord and when you push the power button nothing happens and the power light on the front blinks yellow. i can't to the internet with the wire only wireless what is the ...

...occurs or the power cord is unplugged), when power is restored, the yellow LED will blink while the TV is booting until the remote control is usable. This is normal and is not a sign of

a yellow blinking light at the front of the pad with a 'cord' sign next to it. like a backwards s with a plug Yes it must turn on and if it does n`t that means your power is not enough for it to do so

cord is good. Aside from that, there's not much you can do. Some cities have mobile TV repairmen that will service the unit in your home, and it's much more convenient. Look in your Yellow Pages under

...Cord in the power bar then use remote to turn the TV on then the manual on off switch on the side of TV no luck cannot get TV to turn on.What do You think is the problem?? Fault with the main power ...