Questions & Answers for: whirlpool duet cold water

Whirlpool Duet washing machine - no cold water comes in when I put it on cold cycle Check the tap is turned on if not fix turn off taps, check the lint screen inside the hose end (tap connector end) ...

Only cold water When I run my Duet washer on cold cycle is uses hot water... why? water lines are reversed, this is about the only problem that can cause this

Whirlpool Duet frontloader only washes with hot water. Cold water is turned on and the button for cold is lit. Any help? The cold water control valve may be bad. Switch the hoses to test the control ...

cold water will not shut off Whirlpool Duet, cold water does not stop filling washer even when machine is off!! Mixing valve stuck open, replace

...Whirlpool duet washer dispenses hot water even though the control is set to cold. If I shut the hot water valve off, it won't work. Can you tell me what I need to do in order to fix it. sounds like ...

...duet My whirlpool duet washer is coming with FH error on the screen because we have the hot water turned off. When we have the hot water on it over fills the machine and leaks because the thing to ...

...duet front load washer what does this mean The F20 code for insufficient water going into the machine. Checked the hoses and water valves at the wall to make sure high pressure water is going to the ...

...duet GHW9150POW the timer sounds to be running & cycle sset to cold/cold w/ only cold water hooked up. cycles briefly through timing pattern then sounds end of cycle alarm. If that is a new unit ...

whirlpool duet washer, came back to FH as realized forgot to turn water on. Have tried all the suggestions, but each time I plug the machine it tries to drain water and the motor hums. I cannot unlock

Whirlpool Duet front loading washer (Model: GHW9150) There are two solenoids back where the water enters the machine ( probably an ugly blue color). Possibly the Cold water solenoid failed or the wire