...waste ink pads are full. This requires that the pads be cleaned/replaced and the counter within the firmware be reset. To do this, you will need the service manual for the 1290 to dismantle it and ...
waste ink pad every so many copies. However, you can reset the printer even without replacing anything by switching it off on the silver button, switching it on again whilst holding down the two black
waste ink counter in EEPROM is reset by the service operation. "try in this procedure 1. hold and press ink and roll button then press power on. 2. Red Led 10 times blinking 3. release roll button. 4.
Question about Stylus Photo 1290 InkJet Printer
reset Waste ink pad counter 0% --> OK OK Check && Initialization Initialization will clear the selected above counters. --> Check Initialization The current counter value is confirmed. -
Question about Stylus Photo 1290 InkJet Printer
what does alternate red and green flashing lights means Ink pad full. Reset waste ink counter using epson resetter. Replace inkpad or extend the pipe of head cleaning mechanic to outside printer.
reset the waste counters Note: Will not work on MacOS or Windows 8 ... or... Download the WICReset (for windows) or iWIC (for MacOS) and purchase a WICReset key to reset the waste ink counter that way
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions