Questions & Answers for: twin needle sewing tension problems

...needle is up again, then set the knob on "B" once more. If you adjusted B before, do it again. There you are! You can use twin needles on this machine. It also works well with a walking foot for ...

...in the hem turnup area to the opposite direction. This spreads the seam bulk in both directions. There is a knack to coverstitch machines but a good cover finish is quicker than twin needle on

...twin needle? its basically the same as a normal needle, but nearest the needle most machines have a way to divide the thread before the needle hole. Some machines have a left and right thread guide a ...

...twin needle on a knit fabric? this could cause skipped stitches. is the twin needle quite old and possibly blunt? Is the Hobbymatic a model that requires a slanted twin needle, there are two types of ...

twin needles. I have tried different tension 0 to 9 and different stitch lengths, but all I get are two lines of straight stitches which are not pulled together in a pintuck. I have tried both pintuck

twin needle tension problem I have an Innovis 4000d. I am trying to use a twin needle for hemming knits, but the tension on the lower thread is so high, that it forms a straight line on the back. I ...

...twin needle sewing on the top, and put the thread at the back of the machine in a coffee cup, then bend it around the base of the spindle, and then thread normally--exerting tension at the top and ...

twin size quilt. Any ideas why this is happening? If it does ok for around twenty stitches and then pulls the bottom stitch to the top there is this problem: 1. Top thread has tension added all at one

...twin needle sewing on stretch fabric! I have tried everything but it keeps catching underneath the base plate Husqvarna #1 1200 not the designer one Have watched you tube to get instructions with ...