Questions & Answers for: singer futura needle position

singer Futura sewing embroidery machine. I feel like I have thrown my money down the toilet!!! Hard to download and use the embroidery part b/c of the darn windows vista, which the guy at the Bessemer

...Singer Futura CE 200 I have the walking foot on my machine. My needle was hitting the metal casing for the bobbin. I changed needles thinking it was bent, but that did not resolve the problem. I also ...

...Singer Futura CE-250 Sounds like your tension is too tight and the thread is pulling your needle. Also, make your that you needle position button is on center. If it is on left or right it will cause ...

...Futura ce-200? If the needle plate and presser foot are wide enough to accommodate the double needle, then you can use it. Make sure the needle position is center and the stitch type is straight ...

...singer futura 250 machine with automatic needle threader. I have raised the needle to the highest position, crossed the thread behind the large hook, then pressed the lever down (this is where the ...

singer ce100 is skipping stitches when needle is in center position brand new needle and correct size bobbin You don't say what you are sewing so I'm going to give you general answers in hopes it ...

...futura 250 you can see the feed dogs in the needle plate area and be able to feel them with your finger and the machine will sew a straight stitch when the feed dogs are in the up sewing position if ...

singer futura The most likely cause of this is the needle is not ALL the way up, although it may look like it is. The CE machines are VERY sensitive to the needle position. The second cause is putting

...Singer Futura CE 150. The stich setting straight stitch light is red and the bobbin and top threads are not catching. Any help or advice would be greatly appreciated. Could well be the needle. Check ...

Singer Futura XL-550. Error code 08 If embroidery unit is removed there is no error code. There is no data available on Error Codes in general or on Error 08. ...