Questions & Answers for: shaking and rocking on spin cycle

shaking during the spin cycle. We have had the machine for around 7 years and this problem just started occuring a couple of months ago. Another thing my wife noticed is that it does not do a good job

...spin cycle. We have just replaced the coupling in the direct drive because the machine was not spinning out. Now when we turn it on it shake violently. Have we forgot to connect something or is there ...

...spin cycle Anybody know what I need to do make sure the transport tie downs have been removed during installation and that all four feet are adjusted properly so machine does not rock.Also make sure ...

is shaking during cycle. whenever it gets to the empty and spin dry cycle. It begins to rock constantly. I resolved the issue by placing 2 pieces of wood. Since it appeared to be not properly balanced

...spin cycle Ensure the washer is level by rocking it. If its level should'nt be able to move. You may have a weak floor. to checks this look to see if anything is vibrating around the washer. I had a ...

...spin cycle I recently cleaned under my washer and now it shakes when in the spin cycle A washer can have self leveling legs at the back. If they are rusty or clogged and not free to move, they will ...

...Spin cycle The washer is shaking and shakes objects off dryer? How do you control this? make sure the unit is totally level on all4 corners if this dont cure it make sure there arent any shipping ...

...whirlpool washer and as soon as it went on the spin cycle it started shaking bad! i adjusted the legs and moved the clothes around evenly! still doing it?? i would like some advice

spin cycle. If the washer is shaking too much, open it after the rinse cycle (wait for the tub to stop before reaching in) and spread the clothes out evenly in the tub. Try to balance the weight. Then

spin cycle, not that bad sometimes. could it be springs worn or unbalanced load ,, maybe feet are not evenly level? Most likely an unbalanced load especially when it improve during the spinning cycle.