Questions & Answers for: replacing main board phillips tv

...main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull ...

...start working again. Ur tv have major Main Tuner signal board issues. Take it back where u bought it and get replacement.Or call Philip for a warrenty repair.To replaced the Main Tuner signal

...replacing the capacitors. On this model there are 4 main capacitors that will need to be replaced. If you feel that you can do the repair yourself then get back with me and I will help you get the ...

...replacing the largest main high voltage capacitors 450v 150uf Panasonic Series TS-ED capacitors I think, (in the center of the PS PCB) will correct the issue, I hope its not the inverter board also. ...

main board - model # S310432853752. Do u know where I could purchase a main board? Fault to its main board. Short circuited component/s at it. Contact any service technician; or the authorized service

...in? I've already tried replacing power board but issue persists. However, when I unplug electric strip connecting power board to main board, the chirping subsides. Sounds like main board is

...main board, power supply board, Tcon board, buttons, and all included connections between the previous mentioned items. Fault at its main digital board. Short circuited component/s at it. Contact any ...

replacing I have a Samsung E550 Plasma tv that has sound but no picture, my research leads me to believe that this is due to a faulty Y-Main Board but I would like to verify that before I send off for

...fuse. However after replacing that it still didn't work. I also changed the main board and T-con board and still nothing. What else could it be? Have you replaced the power board or just the

...Main Board be blown? It is possible that the main board of your Phillips Magnavox TV Model 15MF605T/17 is damaged or blown. However, before assuming that the main board is the problem, you can try a ...