Questions & Answers for: repair tension knob

...tension regulator (according to the manual). I've had the machine serviced twice in recent years, asked them to repair that problem - and it never gets fixed. The only way to loosen the thread is to ...

tension is suddenly too loose. I have adjusted the top knob to no avail. it continues to be an incorrect stitch. Raise the presser foot lever (this opens the tension control). Pull about 6" of thread ...

...a serger usually begins around $100. It could be just the timing needs to be adjusted. If the tension controls need new springs or the controls needs to be replaced, this will add to the repair

...top tension and the tension knob isn't responding the the tenison knob needs to be checked, cause it may need to be replaced and that way the repair technican can also check the timing of the ...

tension spring on my White Model 1418 sewing machine was "fixed" by my room mate, but actually, she broke it. I don't know exactly what she did. But the knob does come off and the spring

...Take a look at this page, scroll about half way down it should give you an idea of the tension knob assembly.

tension doesn't change. Like something's loose with it, like the spring. The discs don't clasp together tight. .don't think it needs a new part, but would like to repair myself. repairing it yourself,

it is frozen . What to do? Could be something stuck in the tension disk, like broken thread, lint, dirt. Perhaps try cleaning it. If that doesn't work, probably a trip to a repair shop is in order. ..

need a diagram of tension system parts. Tension knob has been removed and parts are disassembled. do not know order to reassemble. take it to a repair service . we do not know what you have , DO WE?

...I’m not sure about that model #. This place has full tension assembly’s and individual check Springs https://www.sewingpartsonline.com/upper-tension-white-mo-60.aspx you might try a local repair ...