remove the blockage, i did not want the dust and dirt to go inside the bulb. i then cleaned all around the lamp. Reinstalled, and we are go to go. The kids are happy and i am happier since my wife not
...lamp. Had same blinking code for E60A20. New fuse type was 22.00, incl. shipping. Ten screws to remove back panel. Four screws to remove blower assembly, in order to access location of old fuse. Four ...
...lamp (right side). It is accessible from the front. A skinny long nose plier can be used to grab the wires to lift up the fuse out of its holder but there is not much room to work with. Then you will ...
remove the blockage, i did not want the dust and dirt to go inside the bulb. i then cleaned all around the lamp. Reinstalled, and we are go to go. The kids are happy and i am happier since my wife not
lamp voltage. part # is a1109407a. I had the Same issue. on a 50PF9431D/37 set. Many Plasma Set's use a LJ44-00118A PS-505-PH Power supply from Samsun. Know to have this common problem. If you can, or
Question about KDF-E60A20 60 in. LCD HDTV
...lamp. was told by Sony that it was the "lamp driver" (power box). bought and replaced it but issue again only corrected itself for a couple weeks then back again. is it in fact the the lamp or can u ...
Question about KDF-E60A20 60 in. LCD HDTV
...code of 5 blinks. The thermal fuse is way inside on the frame of the lamp housing but can be tested with rear cover removed. If you have one bad the red blinking light will have to display some
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions