grinding noise at the back of the player. It will turn on and everthing works , but this noise goes on until you give it a smack then it comes rigth. Have you got any advice thanks Unit sounds like it
problem with reading and playing dvds before was reading and recording OK. Now is problem with recording dvds. error messages "bad disk" Basic DVD, CDrom Troubleshooting wrong disk ,disk error, First ...
Unlock Pioneer DVR-531H Does anyone know how to unlock a Pioneer DVR-531H DVD recorder. Any help would be much appriciated. Thanks check ebay - i got a disc for my 530h on there which unlocked it ...
grinding noise if its hi piched its normal thats the disc spinning up to read or write speed if that not the case something is rubbing in there and that might explaine the writting errors **DISCLAMER*
record. There's just a sort of grinding sound and the disc gets stuck in the drice. I've tried resetting it but still nothing. it does this with all brands of discs. I have quite a few discs that were
...grinding noises and failure to record sound to me like the DVD-RAM drive has had it. This sadly is not a cheap part to replace, and there's the issue of fitting/alignment/firmware upgrade etc. ...
got a panasonic dvd recorder drmez48vebk that as stoped working no dvd at all dvd makes a clicking and grinding noise looked on internet and says the laser is gone and no power it may be the two ic,s ...
Question about DMR-EZ47V DVD Recorder/VCR
Skullcandy Grind wired, can you make them tighter? Not normally no as they are made with spring tempered steel under the covering. Sell them and buy ones that fit. Go to a shop and try them on first. ...
Question about DMR-EZ47V DVD Recorder/VCR
CD changer when it plays makes a load noise over the CD sound. Bose does not repair any more. How can I repair it? Sounds like a loud grinding sound on 3 slot on changer. SOUNDS LIKE THE CAPACITORS IN
grinding noises, more than likely the player is shot. Sometimes pushing eject and tapping on the tray at the same time may pop it out. I don’t think a reset will work in your case but it’s worth a try
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions