Questions & Answers for: problems zanussi washing machine zwf

...zanussi zwf 1430 w washine machine and it keeps coming up with the error e50 . could you let me know what this means. thank you E20 is "A problem with water draining" Solutions: The drain hose may be ...

...work hi,our zanusi washing machine wont work.keeps flashing E50.have you any idea what this could be.thanks all of the e50 codes indicate motor check your brushes. if you still have problems email ...

WASHING MACHINE, ZANUSSI ELCRTROLUX, ZWF 1430S AFTER IT STARTS THE CICLE IT BLEEPS AND DISPLAYS ERROR E20, WHAT IS THE PROBLE AND IS IT EXPENSIVE TO REPAIIR THE PROBLEM. THANK YOU SARAH STOUT SARAHGAF

Zanussi ZWF 1432 washing machine Why should it take 2.1/4 hours on "normal" wash and 1.3/4 hours on "half wash" - it seems very excessive. because theres more water it takes a lot longer to heat. The ...

e20 error on washing machine zwf 1237 w cleaned pump still no good hi the error shows bcoz of ur door problem... replace the door lock and ur problem will be solved...

...be lucky or it might just be temporary but the fault has cleared on my zanussi zwf 1632 w. washing machine thanks for the offers of help if needed in future i will certainly contact FixYa."Bill

zanussi zwf 1407 ow Hi, Here is a tip that I wrote about no water coming into the washing machine... Washing Machine Problems No Water http://www.fixya.com/support/r3880845-washing_machine_problems_no

...WASHER HAD FILLED UP AND IT WAS WASHING, BUT IT WOULD NOT SPIN OUT. TURNED IT ROUND TO SPIN ON DIAL BUT STILL WOULD NOT SPIN AND WAS MAKEING A DRONEING NOISE washing machine engine is having ...

Zanussi code 43 states 'problem with the door interlock triac', sorry- likely service call ;-0( Good luck John C. E43: Problems with the triac which actions the door interlock. Could be : Door

Zanussi ZWF 1000M washing machine was plugged into small extension lead to socket as main lead from machine would not reach main socket . Have changed fuse but no luck It could be defective main board