Question about PE770 Computerized Sewing Machine
...pe770 bobbin thread is showing on top of fabric. I have adjusted the bobbin tension and the upper thread tension and it is still showing on top of the fabric. I finished one project just fine and the ...
...check and rethread upper thread. But the thread is still threaded fine. I rethread and have redone the bobbin but still get same error. try using a different spool of thead on the top and bobbin also ...
Question about PE770 Computerized Sewing Machine
makes funny noise from bobbin and shreds upper thread I would replace the needle, check for lint in the bobbin, or see if the thread hook just before the needle is holding the thread properly.
upper thread is too lose First check the thread take on tension properly. And adjunct the machine tension , bobbin tension. Then check the thread winding.
Question about PE770 Computerized Sewing Machine
...Check upper thread" error, even though the upper thread is fine. It seems the sensor is not "Seeing" it. This started in the middle of a project. Thread actually broke twice, then frayed. After that, ...
Question about PE770 Computerized Sewing Machine
...upper thread continues to break after 10 stitches. it looks like it breaks at the needle or before set 5 of threading. the thread is fraded or unraveled. try changing the needle again, sometimes even ...
...check and rethread upper thread keep reoccurring? Try changing your needle, make sure there is no thread caught in the looper, and maybe use different thread brand. My machine does not like Coats and ...
Question about PE770 Embroidery Machine w/ USB Flash Port Grand Slam Package
pe770 keeps stopping and saying check and rethread upper thread and the thread gets jammed in the machine its like its get hung up ssomewhere in the machine check to make sure the top thread is coming
Question about PE770 Embroidery Machine w/ USB Flash Port Grand Slam Package
...pe770 jamming up and i get this error msg that says check and rethread upper thread I find that most problems for me have been from poorly wound bobbins or very dense designs. With the dense design, ...
Question about PE770 Computerized Sewing Machine
...upper spool of thread not turning, thread is not going thru machine? The way you are explaining your problem makes me think your. spool is knotted. Check it buy pulling out and unraveling the thread. ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions