Questions & Answers for: needle keeps falling sewing

Needle keeps falling out of Pfaff Creativ 2170 I use this machine for embroidery and recently the needles have been falling out of their holder. I insert the needle the correct way and tighten the ...

thing falls down the thing by the needle, im not sure what itz called, but it keeps falling down and wen i try 2 put it together it still falls down. look for the nut in the needle holder and tight it

needle screw won't stay tight and needle comes out Needle keeps falling out & often breaking as screw won't stay screwed. the screw & the needle clamp may have to be replaced

needle keeps falling my needle keeps falling down, not out of the needle holder, but the whole contraption keeps falling down. did i break something? i feel like something needs to be tightened or ...

...needle still keeps falling out of the slot. Can you help? it sounds like the screw is stripped out or the needle holder has a problem on the left side, it would be a good idea to have the needle ...

...needle bar from falling out A little boot shape metal goes in needle bar then needle. Needle bar has opening on left to slide it in, but it falls out. Help I can only suggest the repair shop on this ...

my needle keeps falling out I replaced the screw but still I cant keep the needle in Have you changed needle type? Is the needle lock screw out far enough to allow the needle to go up high enough?

...BL6800 sewing machine the part that holds the needle keeps falling off the post and the part that holds the presser foot also keeps falling off. What should I do? there should be a lock screw for ...

...needle keeps falling out. I unscrewed the set screw, put the new needle in, then it falls out. I had just taken out an old needle by unscrewing the set screw and didn't touch anything else. Help Be ...

...needle keeps falling out of the needle clamp. The thread guide was loose so I tightened the little screw on the back of the needle clamp. will that cause my needle to drop out while sewing??? Try a ...