Questions & Answers for: makita 10 inch miter saw

makita ls1013fl I need instructions on how to install the blade guard including the spring on this compound miter saw. Step by step instructions or a site that would have these would be very helpful. ...

Makita 10" Compound Miter Saw LS1040 manual? Hi. Does anyone know where on the 'net I can go for the manual for Makita 10" Compound Miter Saw LS1040? (I've looked). A friend gave me one, and after a ...

Makita 10 inch slide miter saw problem While changing my blade on my Makita 10 inch slide miter saw, I accidentally took off the blade gaurd. Three pieces fell out. In what order do I replace those ...

...blade on a 10" Compound Miter Saw (MAKLS1040) there is a nut holding the blade in the center , it is left handle thread , there should be a locking mechanism to hold the blade while you unscrew the ...

Makita 10 miter saw what spring? do you mean the one in the guard? if so you don;t have to remove it to change the blade, give me the exact model number or you can go to makitatools.com and download a

...10 inch cmpund miter saw? With the saw unplugged, push the spindle lock in on the motor side of the saw (a short black rod) while turning the blade by hand. The spindle lock will seat and hold the ...

Makita LS1030 10-Inch Compound Miter saw how do you change the blade There is an 8mm bolt on the front of the guard. Loosen/remove this and the central guard mount will drop slightly. Behind the metal

...and I see there are multiple bearings, do I need to change them all? http://www.ereplacementparts.com/makita-ls1016l-1034-dual-slide-compound-miter-saw-parts-c-97_98_99_37656.htmlnumber 12 and ...

...Makita LS1013 sliding miter saw how do I get the blade guard back on? I have attached a link with the parts breakdown and the owners manual both in PDF format. The parts breakdown should help you, if ...

...10 inch makita 2400b miter saw with an irwin replacement blade - comes with spacers but not sure what goes where the spacers are used to make the hole in the blade fit snugly on the shaft replace the ...