Question about LN-R328W 32 in. HD-Ready LCD Television
...LVDS cable and re-connect it; then try to tap or shake gently the LVDS cable and see if the picture changes. If yes, replace LVDS cable. If not, then measure the power on supplies from main board to ...
Question about HLR5067WX 50" Rear Projection HDTV
...LVDS cable. Remove light engine and locate DMD board(large metal object).On top of it are the two connectors to the color wheel. One is a ribbon cable and the other is a three pin plug. Disconnect ...
...LVDS cable from the T-CON This seems like a problem with the T-CON board or it's connections. This is the low cost method to try. If this set is under warranty you should return it to get it ...
Question about LE40R73BD 40 in. HD-Ready LCD Television
...LVDS cable from going from mainboard to T-Con board the small board in the top middle of tv with a metal plate over it. Clean the contacts of the cable and reattached the cable. If picture still the ...
Question about SyncMaster 2233BW 22" LCD Monitor
...and the integrity of all my internal monitor connectors, any thoughts on what to check next ? Hi there, white screen can be disconnected lvds cable , or bad panel...rarely bad main ...
Question about SyncMaster 2233BW 22" LCD Monitor
...LVDS cable, then the flickering stops the previous image is shown shortly and fades black Mainbord: BN41-01603C T-con: S100FAPC2LVO 3 PSU: BN44-00440A If you wish to get more details visit the site ...
Question about SyncMaster 2233BW 22" LCD Monitor
...LVDS cable (main to timing board) the load put on the power supply drops because the timing board uses a fair amount of power and the transformer(s) quit buzzing. It's very possible I'm wrong on this ...
...LVDS plug, that's the flat ribbon cable going from main to in this case to the panel boards. On Samsung sets if the connector is unhooked going to the main board the inverter that drives the ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions