Questions & Answers for: lg dryer lint filter catching

Lg washung machine/dryer combo(front loader). The washing machine part of it works well, but when using the drier the clothes seem to have a odour that smells like hot rubber Sounds like drive belt or

...lint filter from the dryer and with no clothes, start the the dryer, and if it works then replace your lint filter. Tip: Fabric softener sheets in the dryer can deposit an invisible coating on the ...

...dryer wasnot drying it was blow hot air for 10 sec and stop.so i shut it off . please can some give a solution My suggestion would be to make sure that the lint-filter and the exhaust flex hose are ...

...LG DLE5977 dryer. First of all, You have a serious safety issue. Your dryer may catch fire. DO NOT USE YOUR DRYER. Something went into the mechanism (yes, may be another sock), and a lot of lint went ...

dryer, then the only filter I know is the lint screen. Good Luck! I love my LG combo unit and it saves me hours and hours! I've had it for five years. The laundry seems to wash itself. I put it in dry

...lint filter. The lint filter catches all the lint from your clothes and will need cleaned occassionally. I clean my lint filter after every load. Towels usually clog the filter faster than other ...

dryer lit catcher is coming off The gasket on the lint filter is not very important, but you can get a replacement lint filter. There is a screw at the center bottom area of the lint filter area which

...lint filter does not catch all the lint. we removed the lint filter and found a lot of lint caught at the bottom. how do we get rid on lint in that is below the filter? you either have to remove the ...

...LG dryer model DLEX3250W. Lint frame does not fit the slot anymore. NOT BECAUSE OF EXTRA LINT it's because the frame is warping. Look In the bottom of the slot where lint filter goes. Must be ...

...LG dryer keeps blowing the high limit fuse. All ducts are clean and clear. Changed the cycling thermostat and high limit fuse and it blew after a day. This is likely the result of an air flow problem ...