...tuning menu and select Auto Scan/ Auto Tuning to tune all available channels to store in tv memory. Factory reset actually delete all data/ settings in memory chip and set tv as it was in-box.
reset the TV or get it back to the original as new settings ie as it was when it arrived in the box. Please can you help me do this. Unplug the tv about a day,go into the tv Menu goto SETUP go down to
LCD Tv's processor has hung up due to some errors that have come into the memory. So to reset you can switch off and remove power to keep aside for an hour. If the set does not power on after this
...morning timer is set to active condition and so since the TV also is in the standy by mode it will switch on as set on the memory. You can remove the power for an hour to reset the
...LCD TV : 1. When TV is turned on using remote, it just recycles through all the pre-programmed channels 2. Unplugged the power chord several times but is still does the same 3. Power button on TV ...
...lcd tv This sounds like a common problem on these TVs. Try a factory reset: 1. Press and hold "Menu" and "Channel+" on the TV. (do not use the remote) 2. Using the other hand, press the Power ...
Question about L24H898 24 in. LCD TV
...LCD TV doesn't turn on after a shut off but will after reset. My Sharp LCD TV doesn't turn on after a shut off. I Then have to unplug the TV. After a few hours I reset by hold the -Vol, ...
Question about BRAVIA KDL-40S2010 40 in. LCD Television
...LCD tv model KDL40S4100 won't hold settings. I have a Sony Bravia KDL40S4100 TV and everytime we turn it on it wants to go through the set up and scan channels. We go through the set up and as ...
Question about BRAVIA KDL-40S2010 40 in. LCD Television
...LCD TV sources not changing Do a hard reset to this set and check. Unplug the TV from AC mains wall socket, and re-plug it back after 10 minutes or so. This must make it a hard reset. If it do not ...
...should appear in the top left part of the screen. 4. Using the remote, select "Memory Recall" and Enter. 5. Power off and reboot the TV and Computer. 6. Run channel auto-scan to regain the
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions