Question about WD62 Front Load Washer / Dryer
Hotpoint Aquarius 1200 WD62 (Tumble drying issue). Our washing is always damp after it's been "Tumble Dried"! I note that some washer dryers have a long tube coming out of back of machine and through ...
Question about WD62 Front Load Washer / Dryer
...hotpoint aquarius cdt00 condenser tumble dryer light stays on to say water needs emptying--but dosent and ** hot air just cold I am not familiar with this particular unit, but I have a condensing ...
Hotpoint Aquarius won't turn off.I have emptied the water. remove panel on rhs looking from back and you will see a chamber with a microswitch on top. either micrswitch is stuck, pump faulty or a lint
...hotpoint washer/dryer model wd440 TUMBLE DRYER NOT WORKING the steam gets condensed back to water and pumped away so sometimes draining problems cause poor drying. is the machine plumbed in according ...
Hotpoint Aquarius CTD00 To check the element and stats, you need to remove the rear panel of the dryer, there you will see the stats and the element, you need to check for contin uity with a meter set
Question about Aquarius WMA42 Front Load Washer
...hotpoint aquarius condenser tumble dryer Hi i have a hotpoint aquarius condenser tumble dryer and it turns round blows air and makes all the right actions of a working tumble dryer but it only blows ...
Question about Aquarius WMA42 Front Load Washer
Hotpoint Aquarius CDT00 reverse action tumble dryer. Spins but no heat. Empted water and cleaned filter. I have exactly the same problem, I am searching desperately for a solution. I really dont wont ...
Question about Ariston Aquarius WD420 Front Load All-in-One Washer/Dryer
tumble dryer of my Hotpoint WD420 I get a puddle of water on the floor. Doesn't happen with every use. Do you know what the problem might be? I suspect your dryer vent is blocked or partially clogged.
HOTPOINT Aquarius + super silent will not tumble dry. it starts off OK but then comes up with Error code F-13 can you tell me what this means Hello F 13 is a fault code for water supply,inlet valve or
Question about Aquarius WD640 Front Load Washer/Dryer
Hotpoint Aquarius tcm570. The empty water indicator is on. I have cleared the,filters and no water was in tank. I have noticed it is taking longer to try clothes and the tumble dryer is warm to touch.
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions