...rotor position sensor?When the machine stops filling do you get a beep from the machine and a series of lights turn on indicating a fault code?.If you do which lights are lit when it beeps?With the ...
Fisher and Paykel GW703 OOB Switch Fault I've diagnosed a OOB (out of balance) switch fault with a GW703 washing machine from the error code 00101011. I've checked the switch and it moves freely and ...
...fisher and paykel GWL11 My washer would not spin, so I went into the diagnostic mode and obtained the detaled fault description code #130- Rotor Position Sensor Error, so I checked the connection to ...
...fisher paykel washer the first and 7th lights are lit and washer won't function according to the service summary that comes with the washing machine, you have error code #130, a faulty rotor position ...
come off and that it is not kinked. Tertiary Source: Rotor Position Sensor. Action: Replace the Rotor Position Sensor. Quaternary Source: Motor Control Module. Action: Replace the Motor Control Module
Question about GWL11 Top Load Washer
...fisher paykel gwl11 washer starts to fill, tub move in short spurts, errors with a 130 fault. Have checked the harness at the motor controller now need to check the rotor position sensor but do not ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions
