Questions & Answers for: connect dish reciver tv

Question about DRD485RG DirecTV DTV Receiver

1 Answer

...dish to the multiswitch, or a bad connector on the back of the reciver or even a pinch in the wire but the most common thing I have found would be a loose connection on the back of the reciver with ...

Ad

Question about DRD485RG DirecTV DTV Receiver

4 Answers

connect the other Reciver to input 2 using the same method 3.) connect the dvd to input 3 using the same method.. So now if you want to view reciver1 you set the tv to input1, reciver 2, input2 , dvd

Ad

...dish tells me the channel should be 60 or 73 help Is this a tv2 off of the primary reciver from another room? If so there is a 2 step process to help you fox this. Generally yes it is 60 or 73 but ...

Dish remote. Any ideas? Thanks :) Check your UHF antanae on the back of the reciver to make sure it is standing straight up. you can also see if the tv 2 remote works at the tv 1 location to check for

Question about DISH Network(r) 311 Satellite System

1 Answer

...reciver boxes ? will the dish of one service provider (SP) supports another SP's Reciver Box ? If not what can be done ? Thanks lax no... both dish have correspondent address.. now if swap the two ...

Question about DVR-625 DTV Receiver / 100-Hours Video Recorder

1 Answer

Connect the cable from the tv out port on the receiver to the tv. Power all devices on and run a check switch. This test should read 1 of 3 if all connections are good. A bad connection will read 1 of

Question about 322 DTV Receiver

1 Answer

connect tel line, is their a way to bit This is Mary with Dish Network Customer Service. The message you are referring to is an older message and it has since been made irrelevant. The message will go

...connect dvd dr420 to dish hd reciver with dvr to give me the capabilityto record from my dvr to my dvd dr420? do you have a phone number? how much does it cost to join fixya? Connect to the component ...

Question about AVR 3808Ci Receiver

2 Answers

...Dish Network DVR and a Sony KDS-60A2020 tv. If I connect the HDMI cable on the DVR directly to the tv, I get picture and sound through the tv. If I connect the HDMI cable on the DVR to the HDML DVR1 ...

Question about AVR 3808Ci Receiver

1 Answer

reciver our HD channels work briefly and then a message says the receiver has lost its signal. how to fix? The summer solstice is near and it is common for signals to be misaligned. It does not matter

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...