Questions & Answers for: black stuff around front load

...black 'gook'under the rubber seal around the door. It seems to be more noticeable when I use fabric softener. Is there a remedy to this problem? I also have had issues with a bad smelling LG Tromm ...

...stuff and we leave the doo open...it still smells like mold! And, now there's mold growing (black spots) on the rubber seal. Help! Same problem---moldy smell, especially in towels washed in the ...

...black stuff out of the tray and running a "clean" cycle, I'm still getting black marks...look like grease...on the clothing. Scott Sounds like grease or oil from transmission may be leaking and ...

...black stuff around were the drive pulley attaches. I have a different suggestion based on my washer's similar problem. If the black stuff is powdery and localized at the back of the unit, more than ...

...stuff and we leave the doo open...it still smells like mold! And, now there's mold growing (black spots) on the rubber seal. Help! Same problem---moldy smell, especially in towels washed in the ...

...the bottom front panel under the door, 3 screws hold it on. Pull off the white cover over the pump. I pulled out 4 screws, 4 pennies, 2 quarters, and a bunch of black stuff. Fixed the f1 error.

...black stuff out of the tray and running a "clean" cycle, I'm still getting black marks...look like grease...on the clothing. Scott Kenmore front load stackable washer hi, i think you will find the ...

...stuff works great. I had this disgusting problem and learned from a chemist on line: 1) Use HE detergent. 2) Use a TINY amount of detergent. I use about a tablespoon = 2 short pumps on the Tide ...

...black and hard parts all around rubber ring at front of washer. Do I have to replace the ring? and what else to stop mold? Front load washers are notorious for developing mold/mildew to build up ...

...black stuff leaking. I want to replace with clear vinyl. Is it attached near the drain hose, how hard is it to get to? Looks like you have to full disassemble this washer? Is that correct? Thanks the ...